yes, the rules are quite straightforward, but In order to take the lenght of the hull must I take as reference the tonnage deck?
ok thanks but I don't understand the term "reverse power" used for diesel generator on board ships.
many thanks for answer, but someone told me that for bollard pull is necessary appropriate winch, is this possible?
My name is Riccardo. I want to ask you an important question; what is the test procedure during Bollar pull on board PSV VESSEL?
I must find for my fishing boat the correct LOA (as per regulation CEE n.2930/86). in order to verify the international tonnage of...
My name is riccardo, I have received question regarding some procedure on board of ships . I don't understand what to do for Prepare...
I have a fishing vessel of 16 mt in lenght, I must install on board two fuel tanks. Must These tanks be made of steel or reinforced...
ok, the length of the hull is 18m, the number of people is around 70.
I am not able to find appropriate rules in this case, can you help me?
I have a boat used to transporting of people; i must put near the living room a room containing electrically heated cooking plate or...
dear Pascal Warin,
many thanks for answer, now the situation is more clear for me.
thank you so much
I have a boat used to recovery oil; the lenght of the boat is 16 m; In this case I think that Load line convention is not applicable,...
ok, Can I put batteries under beds of the boat in order to Fulfill in the same time the exact requirements of the ISO 10133 ?
ok, i have following pumps :
fuel pump, bilge pump and ballast pump!!!!!
I must insert in my boat some batteries; where do I put them? As per European Directive i should ensure appropriate...
ok. three pumps was installed on board a boat, chief engineer told me to verify the stand- by pump; but i dont understand in what consist the...
What is a stand by of a pump?
is the automatic start? or is the stop of the pump in case of small flow?
many thanks for answer;
yes, I am asking you info for AC,DC e bonding( onboard ships);
thank you so much!!!!
HOW CAN I ESTABLISH THE EARTHING SYSTEM ON BOARD SHIP?
WHAT ARE THE REASONING TO DO?
many thanks in advance