Does your phone have a camera?
Scroll down to the bottom of this page.
Lots of links (look at the bottom of those pages too for more links!)
Thought this may be of interest Trackie2:
Chinese fishermen find drone ship ‘used for spying by foreign country’...
There is no "perfect", don't jinx yourself.
So my 3 x 10's (30 square inches) isn't that far off your 6x6 (36 squares).
Both times two, so 1/2 a...
6x6=36 x2 = 72 square inches
8.5 x 8.5 = 72 x2 144 square inches
What is the weight of the forward cockpit full of water?
Estimated volume would yield that answer.
I'm thinking in the 5 cubic meter zone.
Yes, pull the plugs and get some "fogging" fluid in there.
Do this every day for a week and then try and turn the engine over by hand, with a...
Ya gotta move the rudder.
I have no idea where or how much but if it ain't working there, try moving it.
Or change the rudder shape, that may be...
It's about direction of flow.
Ad Hoc, of course, is right.
John, If you can make your sole height equal, inside the doorway and out,
a high sill...
It would appear the answer you seek is about 1 1/2"
I know what he's trying to explain.
It's like a driveway drain in front of a...
You are most welcome.
Powered or is it a glider? Are you familiar with how "gliders" work?
A plastic lined wooden rectangle would work but don't...
Welcome to the Forum.
Lets try and answer some of your questions before we get too distracted.
No software I know of for...
My only concern with this is weather sealing the top section.
Rain and greenies from over the bow.
Sliding to port may be easier in that regard.
You're such a wet blanket.
That framing is just a mock-up I believe.
I'm suggesting you eliminate the top "Dutch" door,
and make the lower door open out for water flooding...
Great pics John!
How's that forward door going to work?
The bottom half swings out, the top half swings in?
How about the top just being a...
Cold but clear today!
Great shots John.
Not necessarily, but they certainly have higher torsional loading than monohulls.
Interesting comments about torsional loads on the catamaran front end of Sea Sleds:
Hickman Sea Sled plans status - Boat Builder Central -...
I was in touch with a Kiwi who claimed he was 6-months away from a functioning box.
That was four years ago... I haven't heard from him.