Do you know the difference between JK and JP engines?
It seems that JK has somewhat higher torque and it also is delivered earlier.
Has the JK...
...back to the old drawingboard.
As I mentioned earlier I bought 3 engines from a bloke nearby.
They were all supposed to be 1.6L VW...
I do appreciate your concerns Fred but as the Albin 25 has a semi-displacement hull it is actually possible to go faster than the "hull speed" of...
No, pretty sure all engines are 1.6L NA.
Transporters (VW Type 2 T3) between 81-87 had that engine.
I'll get the exact engine code next time I...
Today I bought an engine or should I say three!?
I got one working engine and two spare part engines for 280$.
The working came from an banged...
Thanks a million CDK!
The MD1B was rated at 10hp DIN @2500 rpm.
The MD2B was rated at 25hp DIN @2500 rpm.
The MD3B was rated at 36Hp DIN @2500 rpm
...according to the...
I had a conversation with a fellow Albin owner here on the forum.
He have converted to electric drive which I also was thinkig about.
I think I have found the power map for the VW 1.6L NA Diesel.
As CDK mentioned in another thread the torque curve is really flat.
Yes, I have visited that forum but it was along time ago.
Perhaps time to pay them a visit again :)
Hi Par, thanks for replying!
The 1969-1972 Albin 25 hade the same engine that I have (AD-21) producing 22Hp.
Top speed for these boats were (are)...
I had a look at the Bowman heat exchanger on CDK's pictures.
How tall is that reservoir ? I looks like it sticks up quite a lot over the engine !...
Do you have another heat exchanger than Bowmans that you recommend ?
Any technical information on the engine would also be very...
I have an 40 year old Swedish made boat called Albin 25.
Its a 25ft 1.6ton fiberglass hull which is hybrid construction between dicplacement...