Woody Runabout appraisal: Well pleased with the effort and now enjoying the water of Beautiful South Devon, UK. Head for the Hills...
Launched and performing well. 20mph achieved in a light chop - might be a bit quicker on smoother water. Seats did not break but the nylon ties...
First shakedown completed and performance went beyond my very best expectations. Head for the Hills https://moggo-blog.blogspot.com/ Hope to post...
Hoytedow. Well those seats are the result of my passion for laminating and steam bending wood - a progression really from a little sketch one...
Almost ready to launch! Should I wear a bow tie on the day suggests my eldest son? A few more coats of varnish and final fixing those detachable...
Update 07-07-2020 -- Woody runabout progressing well, it might even reach completion by the end of the month, but more likely it will run into...
I was quite amused by reading these posts and the "Good Bad and Ugly" viewpoints discussed regards plans! For what its worth (not much I suspect)...
Fallguy, Thanks for the advice regards the trailer. I have been pondering long and hard how best to support the hull weight and you have given me...
Decking complete and construction work virtually finished. There are many a minor detail which seem to take a major and disproportionate amount of...
Exciting stage reached with the decking out of Woody Runabout. BlogPost Read more: Head for the Hills https://moggo-blog.blogspot.com/...
Woody Runabout build update at 3 June,2020. Lots of work for little progress - should improve soon. Blog link : Head for the Hills...
Hi Hoytedow and Hi to Bajansailor, Very many thanks to both for these posts. It helps enormously to know those sizes I have to play with at the...
Help needed - Due to pandemic my outboard is still at the shop; Meanwhile I am building a small runabout woody and need to know the minimum...
Progress report see blog post https://moggo-blog.blogspot.com [ATTACH] [ATTACH]
Head for the Hills https://moggo-blog.blogspot.com/ Update 11th May panelling the inner floor and motor outboard well. Hopefully after the false...
Early May Update on Woody Runabout build ongoing in my little garage:Head for the Hills: Woody Runabout stage 14...
In "mid-flow" so to speak with my woody runabout I though some may like to know how one old sea salt does it - quickly without hurrying:[IMG]...
Those lines show zero rocker aft of the middle section. Best adjust your moulds to reflect this fact. The sheer you can take care of later but not...
Varnishing the side panels and transom ; Progress report for 20th April 2020. Blog Post : Head for the Hills http://moggo-blog.blogspot.com/...
Beginning to veneer the side panels. For images see my blog at: Head for the Hills: Grandads Runabout Phase 12...
