It's time for winter storage. I'll work to improve this shed to some degree, but it should get the job done. [IMG] [IMG]
A jointer? The splash boards must look pretty good. I'm not sure they're "20 footers" like you said. :)
How did you make the splash boards? I'm guessing it required a table saw to get the angles right.
The extra mechanical advantage doesn't hurt.
I divide the line in half, tie the loop end to the car, and then feed the ends of the line out to the blocks. Then back to the car's sheaves and...
Yeah, I can't be certain from the picture of your cockpit but it looks like you might be rigging up your traveler lines differently. Do you have...
I dug up an image of my set-up. The line is tied in the middle, led out to the block, back to the car and up at an angle to the cam cleat. Same...
Oh man,,,I just realized that I could be completely wrong about the control line set up. It's been awhile...
One of the original bronze bolts broke and it was easy enough to replace it with a regular stainless steel bolt and some washers. [IMG] Last...
My traveler hardware is packed in a zip-lock bags and stashed away in a boxes. I think I saw it the other day. Ok, the box was above the...
The hatch cover and the splash boards match nicely. Some how the partner looks like an espresso color. Look at that cockpit...I think that...
It probably should be no surprise that these boats sink if left in the water over night. It's all those screws for the centerboard gasket. Check...
Maybe give the boat and yourself a rest. Looks like it was a tough day on the water; not bragging but I've had worse. Don't worry about it for...
What did you do for the compression post?
I moved this summer from Florida to New York. Snow on the ground here.
Nice job with that gasket batten. I remember that it wasn't exactly easy. Are you running a one-side gasket system or is the other side still in...
If you've had some experience with righting a capsized boat then you should have no problem. What you're talking about is "turtling ." Some boats...
Not really necessary. It depends on the wind, you can decrease the chances of capsizing by not sailing downwind in heavy air. How much sailing...
I think your boat was set up for stern sheeting. It a good arrangement. This would also explain why you have no traveler hardware. Are those 1/4"...
The rudder look pretty good. How did you reinforced the top? The rig is straight forward. What are you wondering about?
