I recommend to use Autodesk forums. They answer quick and are specialists within the software.
Delftship is free, and very capable.
For a more easy to use I suggest using Fusion 360, also free. It allows to create hull from both hull lines...
Yeah i 3d printed one. Works like a charm.
Nah the clamp is fixed. so wholæe mast rotates within sliding track.
Also i never knew of this mast hound. i will try local boat hardware store =)
Yes it is a sailboard rig. All the boats that i could find are configured with it, aperantly thats how they were made. The boat has fixed anchors...
I have acquired a searider 360 catamaran, i think it was sold as sailcat/surfcat in USA:
It was a bargain, only 50 euros :p
The boat is in very...
So i decided to test bonding and strength of fiber reinforced 3d prints.
This is mainly to illustrate capabilities of 3d printing use as core...
These offshore supply vessels operate in shitty waters and are designed for to be versatile doing pretty much all jobs and should be able to be...
- Regarding the mannequin. If you set all the components to be aluminium. The weight of the mannequin will be aprox 85kg. It is good for weight...
Grab a coffee, load the idea revolver and keep social distancing during these corona times.
And also, keep a nice tone.
This is all about...
plywood catamaran hull
Made with fusion 360
For 3d models or other info please pm me
Hello. Sory i thought you ment a monohull. But as Bluebell mentioned your multihul is so slender that is creates extremely low wave rising...
If you wanter a really indepth mathematical explanation.
Google This: Michell’s thin ship theory
May i ask what sofwware have been used for these
1) Wich boats?
2) Planning only downwind if sailbot.
4) there is no "simple terms"
Look what happens to water in a...
thank you very much.
Dont take it as a awnser this is my aproach to your problem with some predefined variables such as diameter and arc lenght.
it might not be...
Here is an idea. if you know your shaft torque, find the power available at paddle max distance . Then isolate the area in displacement formula...