thank you
It's just a simple molded piece.It looks like this "c" I didn't see one like mine at taco
I am restoring a boat built in 1983 and would like to replace the rub rail but I have no clue where to find one. It is a simple piece that wraps...
After 3 weeks of stripping,sanding,,grinding and more sanding I got the paint finished on the vaporvette. :D [IMG] [IMG]
what's the grand?
got the bottom side shiny this weekend,will flip the boat and paint the top next week. [IMG]
I like it, looks like fun. more pics please.
nice build. The 1x3"s on the bottom simulate common v-hull designs. Why is this design used on boat's? does it add stability?
I am painting my first boat as we speak so unless you have the same illness as me and want perfection out of everything you should just leave it....
That won't make a good pirate boat at all.
trying to color match that will be near impossible. I would paint the whole boat.
apparently none of them did:cool:
I would remove the paint,scuff the gel coat,prime,sand then paint.
when you get to the gel coat use a 220 grit paper it will take a little longer but will be less work in the long run if you want it smooth.All you...
I removed the tip and was going to put the goo into a cup to mix what was left,the epoxy was nice and wet at the tip but the plunger wouldn't...
No,but I would snag that Michelin man off the truck.
I used some six10 today to hold things down. The stuff worked great but I only needed half the tube. 1/2 hour later I had a need for a little more...
Thanks Ben, I saw that stuff and watched the promo video for it and they didn't use any or even crack it open to show the viscosity. A smaller...
Here are a few pics of what I have,It's a very small amount of epoxy needed and was hoping for a cheap solution and not to have to buy a whole...
