I made beautiful joggle sticks. Then we hung them up and admired them and went back to doorskins, hotmelt glue, and staples. The staples keep the...
Don't use a torch on a diesel tank. The heat gasifies the residue. Fill it with water, cut it with a worm drive circular saw (with a GFI).
Alternative proposal II I'm not a fan of convolutions to avoid a catamaran hull form. From my experience, that question (efficiency) has been...
I meant to say.... I said: "I wouldn't say that. Convoluted maybe. I'm curious if there is some possibility of infringement of David Tether's...
Preposterous? I wouldn't say that. Convoluted maybe. I'm curious if there is some possibility of infringement of David Tether's patent...
Chuck- Start here- http://en.wikipedia.org/wiki/Carbon_neutral First let me say that I'm not going to get into a discussion about anthropogenic...
Sorry about that Tad. What I'm looking for is people who are interested and experienced with large cats first of all. While it may be true...
Thanks for the info Tad. "If the phone doesn't ring. . . "
I built a 65' cat with KHSD cylinder molded hulls. Displacement of about 66,000lbs. I like the system a lot. Kurt was easy to work with despite...
I should mention that I'm serious but in the formative stage. I've built a 65' already. I'm pretty sure I know what I'm doing and that it will happen.
Designer for a 50 meter, alternative energy powered, catamaran research vessel. Sails obviously. Couple of small submersibles, diving, etc. Combo...
If the BD won't support the weight of the hulls, the boat would have probably broken up by now. The flatbed should work fine. You'll need the...
