any photos of the belt drive to the gearbox, I wonder how long that lasts?
yes 2 cyl small engines had a 3phase alternator. Just buy the correct rectifier and you will have a charge system, 4 amp I think it was
check the kill switch circuit post a photo of the powerhead
many of the new 4 strokes that are on the market have gotten light due to some very high tech die casting. Meaning they are paper thin, lets see...
I think the market is people that cant or wont have petrol and thats it. That market although small its one that can pay. Will it have EU and EPA...
nothing to do with the EPA the current E-tecs are much cleaner than todays 4 slugs
I can only assume they have step up gearing under the powerhead to reduce the torque in the gearbox?
google a 150hp electric motor for any voltage, I dont think it will fit under that cowl I suspect they have multiplied the motor torque by the...
blowing the carb with air doesnt cut it. you need to use a squeeze bottle with liquid, hobby shops have them for model engines. Then you can see...
Cars do have flex fuel sensors in them for deal with random fuel mixes and sealed fuel systems. If you want to pressurize the fuel tank and piping...
many race boats chine walk its just a driver skill to steer them out of it as it usually happens at less then full speed especially when you dont...
how much gap from aft of strut bearing to fwd part of prop? What is the diameter of your shaft? How long is he shaft? What diameter is the prop?...
Laser going down as well, current cluster is a gift to all the new single handed dinghys vying for top dog
Same same Korean Airlines
Are you sure that link doesnt bolt through the middle hole in the aluminium steering arm, as in the part where you would pick up the engine from...
Can anyone tell me if I can find out who/where AU-WWA132126 comes from Thanks guys
is it creating a hook in the hull when it is moving in the water as its longitudinal strength is not enough with all that weight hanging off the...
you mean the drag link, 173699 for 1999 20-50hp? [IMG]
check the red lever on the fuel primer, is it pointing down the solenoid ( correct or away, wrong)
have you tried it? You might have to change the crank top bearing housing to mount the new style timer base, flywheel for sure. Personally I would...
