Search Results

Search Again
Page 1 of 8
  1. CloudDiver
    Post

    International 505 Racing Dinghy Mold

    [ATTACH]
    Post by: CloudDiver, Feb 7, 2021 in forum: Boat Molds
  2. CloudDiver
    Post

    International 505 Racing Dinghy Mold

    [ATTACH]
    Post by: CloudDiver, Feb 7, 2021 in forum: Boat Molds
  3. CloudDiver
    Post

    International 505 Racing Dinghy Mold

    I'm still checking my back-ups for the pictures I had. As I mentioned before, it is stored indoors but there is a bunch of equipment in the way...
    Post by: CloudDiver, Dec 19, 2020 in forum: Boat Molds
  4. CloudDiver
    Thread

    International 505 Racing Dinghy Mold

    I have the hull and CB structure Molds for the International 505, 17ft planing dinghy. This design was by Pegasus Racing, 3 hulls were pulled...
    Thread by: CloudDiver, Dec 16, 2020, 4 replies, in forum: Boat Molds
  5. CloudDiver
    Post

    Rigging Configuration Changes?

    Many boats were designed with multiple sail/rig plans. Some had the original rig changed and will have drawings done by the original N.A. or...
    Post by: CloudDiver, Apr 21, 2019 in forum: Sailboats
  6. CloudDiver
    Post

    Carbon Round Tube Lay-up Design for Beginners

    Thanks very much! Excellent suggestion...
    Post by: CloudDiver, Nov 13, 2018 in forum: Materials
  7. CloudDiver
    Thread

    Carbon Round Tube Lay-up Design for Beginners

    I'm interested in making some parts using CNC filament winding, mostly utility kinds of things that aren't subject to the heaviest loads like...
    Thread by: CloudDiver, Nov 9, 2018, 5 replies, in forum: Materials
  8. CloudDiver
    Post

    Crowther design 226A (42 foot cruising cat)

    Thanks, this a great resource...
    Post by: CloudDiver, Aug 22, 2018 in forum: Multihulls
  9. CloudDiver
    Post

    Crowther design 226A (42 foot cruising cat)

    The Arrow 1280S kit price is 90K USD with container shipping from South Africa. I have a quote from my Schionning for this but I also have a...
    Post by: CloudDiver, Aug 16, 2018 in forum: Multihulls
  10. CloudDiver
    Post

    Crowther design 226A (42 foot cruising cat)

    Ummmm..... so I'm not going to get involved in the above posted.... er.... discussion; but I do want to clarify a few things. First off, I was a...
    Post by: CloudDiver, Aug 13, 2018 in forum: Multihulls
  11. CloudDiver
    Post

    Crowther design 226A (42 foot cruising cat)

    Thanks for your recommendations... I have actually looked at designs by almost all of those designers. I'm actually most interested in the...
    Post by: CloudDiver, Aug 10, 2018 in forum: Multihulls
  12. CloudDiver
    Post

    Crowther design 226A (42 foot cruising cat)

    If I were buying a second hand set of plans from someone I wouldn't be paying the designer his due and that wouldn't be right. That's why I was...
    Post by: CloudDiver, Aug 10, 2018 in forum: Multihulls
  13. CloudDiver
    Post

    Crowther design 226A (42 foot cruising cat)

    Does anyone know who owns and administers Crowther's designs? Did he establish an Estate or have family managing his IP? Is it possible to still...
    Post by: CloudDiver, Aug 6, 2018 in forum: Multihulls
  14. CloudDiver
    Post

    Nomex Honecomb Panels without Prepreg?

    Thanks everyone for you respones and suggestions. It pretty much confirms what I have learned so far, working with honeycomb is much different...
    Post by: CloudDiver, Jun 2, 2018 in forum: Fiberglass and Composite Boat Building
  15. CloudDiver
    Thread

    Nomex Honecomb Panels without Prepreg?

    Is there a method for vac infusion/wet lay-up bagging to laminate both sides of a Nomex Honeycomb panel with a thin layer of fiberglass/carbon?...
    Thread by: CloudDiver, May 31, 2018, 5 replies, in forum: Fiberglass and Composite Boat Building
  16. CloudDiver
    Post

    Carbon Lay-up for Racing Dinghy

    I watched some videos on honeycomb layups. You are right, infusion is not used and there are multiple steps involved. To avoid resin filling the...
    Post by: CloudDiver, Mar 26, 2018 in forum: Boatbuilding
  17. CloudDiver
    Post

    Carbon Lay-up for Racing Dinghy

    I can get some 1/2" nome honey comb for about $150 per sheet (4x8). I may need 5 sheets if I include creating the foredeck, transom, and seat...
    Post by: CloudDiver, Mar 26, 2018 in forum: Boatbuilding
  18. CloudDiver
    Post

    resin infusion foam scored one side

    I understand you want to avoid additional complication, but you already seem willing to use two pumps so that in and of itself is added...
    Post by: CloudDiver, Mar 22, 2018 in forum: Fiberglass and Composite Boat Building
  19. CloudDiver
    Post

    resin infusion foam scored one side

    I don't know how wide or long your infusion will be, but try the serial infusion technique. Helps avoid dry spots and you mix smaller batches of...
    Post by: CloudDiver, Mar 21, 2018 in forum: Fiberglass and Composite Boat Building
  20. CloudDiver
    Post

    Carbon Lay-up for Racing Dinghy

    Not certain about 3mm, it was just a rough guess. I imagine I could go as much as 6mm.
    Post by: CloudDiver, Mar 21, 2018 in forum: Boatbuilding
Showing results 1 to 20 of 156 Next >
Search Again
Page 1 of 8