and see the results in case when the boat loading is increasing for 0.75 LT (15%) [ATTACH] [ATTACH] [ATTACH]
take a look on that size of propeller with cup and gear ratio 1:2 [ATTACH] [ATTACH]
...for your records , the Input data set
...and regarding tha ratio take a note on that ...[ATTACH] [ATTACH]
See also that ...[ATTACH] [ATTACH]
[ATTACH] [ATTACH] [ATTACH] [ATTACH]
....and what was your input data set to extract these results ?
Good evening tonipu,
I can't read the image https://www.boatdesign.net/attachments/150437-1544cdca485b17261c09ce8260419186-png.164389/
Could you please explain "The maximum RPM during sailing is 450 and when steaming 375." ?
If we understood well ; The correct...
What is the size of the hub ?
Try always to save your jod in .dxf mode 3d (Autocad 2007 level).
You will have more conversion options and a fair base to compare
I tried few times to open your file and failed.
Could you please tell me the software you built it ?
What do you mean by "3D file of the propeller?"
You have already the 3D file "OCN_3D.dxf."
Hello to everyone there .....
I suggest to follow the attachments.
If you need any help on construction details to the hub, please tell me....
Or maybe you need that for a Bow Thruster device ?
Hello everyone into your Group...!
Let's do the job by the book.
Please tell me more of your project's data to avoid any mistakes,
and give me...
Good Day to your Group...!
Send the size of Diameter and the Pitch.
First you should know the Ship's Flag and if they had surveyed the Main Engines' Installation when that happened (2008 or later).
You have to...
This Version 6.27.259 corresponds to last pro edition.
According to http://wiki.bk.tudelft.nl/toi-pedia/Rhino_File_Exchange
all the job...