I have contacted them and it will be fixed a.s.a.p. thank you for reporting it. If you send me a mail I can send them to you directly.
I did not have a good look myself yet, where are they expected to be? I will ask for you.
What do you mean by B11 and B12?
Do not forget the Papers in the library tab, those will explain a lot.
Yes, you need to request a user acount.
Delft University has released the results of the Delft Systematic Deadrise series (hard chine planing hull), just like their well known Systematic...
The Sailing Yacht Research Foundation is following up its Wide-light project with a new 14 meter study. Files and data are available from the...
Rhino3d now has a CFD plugin including free surface models. Could this be interesting for boat design use?...
The file has poke trough points where they should not be. Go to the tab "station data" in the offset file manager and remove all unwanted 2-Poke...
You can export .off files with Rhino and the Orca3d plug in. You can also add the keel points manually in the ORC VPP hull editor.
The Delft series is based on a lot of tests, that compares to an awful lot of computing time and data. As long as the yacht is within the...
Uli, Can you please provide your diagram in a table/Excel format? I am also discussing the results with people from Delft. Arthur
Seahorse magazine suggest the model is a model of Ran2. The ORC measurement certificate however states: RAN 2, GBR 7236 Loa : 21.974 Beam: 5.805...
With Orca 3d I get almost the same hydrostatic results as you at o mm.
The Sailing Yacht Research Foundation has compared CFD results from 5 CFD packages against tank test results from the Wolfson Unit. All results,...
I agree a fixed simpeler. The owner however has to drive 4 hours with his boot on a trailer to the nearest open water, sometimes trough the...
This boat will always sail on deep water, it is just for road transport and storage as the owner lives in the middle of Germany. You could however...
I would like to use a dropkeel without its own lifting system. The boat will always be launched with a boatlift and my idea is to lower the hull...
With the Orca3d plug-in you can perform hydrostatic calculations directly in Rhino, avoiding export-import problems. It can also keep track of...
You can cut the pathway into equal length pieces and render sequels (during night time for example) then copy past all the sequels together in...
