Hi Can anyone advise the requirement of conducting inclining experiment for a crew boat with length less than 24 m?
Can anyone advise how to do the powering calculation of a pusher tug.
Pusher tug pushes -4 barges,each of 350 T capacity.
As per MLC, there is a minimum area requirement. But if a room has attached toilet, can that area also can be added to floor area?
Does anyone know why we are taking the pressure head up to the top of air pipe for the scantling calculation of tank?
For sewage tanks, air...
Can anyone provide me the damage stability criteria of fishing vessel(Deterministic approach).
Vessel length is 40 m.
I could find anywhere the rule BV rule NR490,Part B, Section 2 for crew boat length less than 24m.
This reference is given by BV class...
What is the applicability probabilistic damage stability for passenger vessels?
Is it applicable for Inland vessels?
Below is BV class notation
Anybody familiar with evacuation plan of passenger vessel?
Is it applicable for existing ships?
I have some doubts regarding the stability analysis of split hopper barge.I have auto hydro software with me.
I am planning to analysis below...
Bending of 120 mm plate with a radius 235 mm is not possible in our area?(No facilities.)So We have planned to bend 2 60 mm thk plate...
Anybody knows the deflection limit for Aluminium beams?
I am going to design an electric fiber glass boat.I just want to know what type of fiber glass material is used commonly to build...
Can anybody tell me how to make double hull(catemaran) model in model maker?if you don't mind please send me one sample gf file.
how to calculate deflection of a ship?Is there any software?
can anybody advise how to design modular pontoon couplings?
Or Please suggest me any reference documents or rules?
Is there any class requirement for minimum volume for Sea-chest?
Engine power is 533 kw and vessel operating in tropical zone....
Can anybody give me the exact meaning of half angle of entrance.
I believe half angle of entrance is directly proportional to...
In plimsol marking there is an allowance of 1/48 given between summer and tropical sea water markings. What is the reason behind this allowance?...
I am planning to design as Ice class passenger ferry with following specs,
10-15 passenger,1-2 cars....
Can anybody suggest me the formula/Reference to calculate Minimum required chain locker volume?I believe that there is no minimum...