Thanks all for your valuable informations
Normally Every passenger ship regardless of size and every cargo ship having a length (L) of 24 m and upwards, shall be inclined upon its...
Hi Can anyone advise the requirement of conducting inclining experiment for a crew boat with length less than 24 m?
Can anyone advise how to do the powering calculation of a pusher tug.
Pusher tug pushes -4 barges,each of 350 T capacity.
Hi TANSL, Thanks for your prompt reply.Do u have any reference document for stability calculation of split hopper barge apart from the document...
Can i any one advise which all points to be considered as floooding points of split hopper barge.Do i need to consider hoppe coaming edges?
As per MLC, there is a minimum area requirement. But if a room has attached toilet, can that area also can be added to floor area?
Does anyone know why we are taking the pressure head up to the top of air pipe for the scantling calculation of tank?
For sewage tanks, air...
We are checking the stability vessel at loading conditions with different cargo densities in hopper closed condition and lightship stability...
Ya.My calculation was correct .The flooding calculation is approved.
See below point number "k"(This is as per KIV 2015 amendments)
Thanks for your reply.I will recheck my inputs and calculation
L(LCG) is 8.23 m from forward of A.P."f" denotes fwd not feet.
The vessel length is 16 m not 40 m.
Hope this will clear your doubt
Kerala Inland vessel Rules.As per this rule, they are asking for flooding calculation.
T(TCG)-Assumed as zero.
Regarding GM value. This is Min.Required value of GM
This is as an existing vessel.The vessel has only 2 bulkheads.one at Engine room aft and other at engine room fwd.Now the vessel is going...
The vessel is only 16 m length and 5 m breadth.As per the floodable length calculation vessel has to fitted with more than 7 bulkheads...
Thanks for your reply.I just need to check the given bulkheads are okay after the vessel gets damaged.