Thank you very much!
Construction is going. Building of the 3rd and 4th half and joining of the halfs.
Yes, I sent you PM.
Some more photos. Construction is going slow because of the lack of materials.
Two float halfs completed and mold reversed.
PS: I am also...
I have for sale a set of Kurt Hughes 39 Demontable Trimaran Plans.
Bom dia Albert,
Mandei-lhe um email.
O meu email e filiperosa arroba 360blue ponto org.
Good morning Albert,
Just send you an emai.
My mold is not a good one, will try to work more for the main hull mold, but it is important that the longitudinal wood strips keep the angle from...
Thank you for the message. Yes, I used a 2000watts heat gun to heat the foam a little whille bending.
I just finished the second...
Planking the second float half
last coat of epoxy and removal of the first float half. Not perfect but not bad for a first time.
Bulkheads in place
some more photos, glassing the inside
Mold completation and planking of the first float half
Hi Joe, yes, and you can reuse them. A few more pics. I started to build the mold for the amas.
Some photos of the float bulkheads using 80kg/m3 foam epoxied with 600gsm fiber each side. Vacuum at -10% of normal atmosphere using bubble wrap...
I was convicted to start build my boat around eight years ago. After a few years and some plans review, I decided to go with the wider...
I started to fiberglass a few small parts for my trimaran.
I used foam core, after one first layer of 80 gsm one second layer of 540 gsm....
Bought some foam from Herman,
Just to say that it was very good packed, fast and profissional service.
Thank you very much.
Send you a pm.