Can anyone help on how to locate imperial draught marks on a merchant ship
Can anyone help me with a rough sketch of midship section drawing for a power boat about 15meters in lenght?
Looking forward to a...
This is a calculation exercise so I wasn't given the details. All the figures are based on assumptions.
Can anyone help me on how to calculate this:
A vsl is 30mtrs in lenght, with froude no of 1.49, wetted surf. Area is 160.54, spd...
Can anyone help me with a sample sketch of midship section drawing for small craft?
Am about to draw midship section of small...
I have the formular: thrust power = Delivered power * Propeller efficiency.
Am about to calculate Thrust power and I have Delivered...
Helo all, kindly check the attached file that contains the KN data with the curve.
At full load, the vessel can carry 280 Tonnes of...
Helo toy, am nt planing to make any1 but I have a exercise relating to your question.
Its exactly as your question.
tnks to all for all the reply. The question has nothing to do with the shape of the tank, its just abt changes in the centre of gravity of a...
Helo Toy, re u studying IIMS course?
if you are sure with the condition of the cooling system, check the exhaust system cause if there is buildup of carbon on the head you will have...
A vessel with a displacement of 100000 tonne has two tanks, one 'x' metres aft of the ship centre of gravity, the other 'y' metres forward of the...
How to dervive the scantling lenght
Helo Hoc, please can you explain to me how you derive the figure you use in the drawing of "Hull girder...
Helo Ad Hoc, kindly check the drawing i use and the table for the calculation i attached below this calculation i have done.
Midship section drawing
Dear Hoc kindly check the attached file for the midship section.
Looking forward to a reply?
You re rite Nick. if i may ask you were is ur location?
am having some problem with the drawing as they are not clear; but i have a midship...
The vessel's profile drawings
Dear Tansl, please kindly check the drawings that i posted below for the vessel. though the mid-ship section...
ok Tanzl. the profile drawing are not clear. but they gave me some scantling details which can be use. I have post the scantling details on the...