What stability criteria should be used to analyse stability for a pipe-laying barge?
The attached picture shows type of related...
When you want to calculate stability by MAXSURF, there are two options
for fluids in tanks: 1-maximum free surface 2-sumulate...
Is it necessary for an oil barge to have double hull?
Would you please help me with any information about semi submersible propellers for high speed crafts.
Any article or advise about...
what kind of test weight normally use for inclining experiment of a catamaran boat like the attached picture?
there is a tanker barge(15.8X6X3m) with a single tank (9.8X6X2.9m) in the middle and carry fresh water.
i want to calculate the...
i do not have enough space in the cargo hold to keep 76mm gap between the containers.
can i consider 3mm gap between them?
Is There A Class Notation For A Barge Which Carry Deck Cargo And Cargo Oil Together?
I Want To Simulate A Container Ship Motion In Shallow Water
By A Software . Can Maxsurf Help Me?
How can i satisfy the classification society that the strength of 2nd deck in the attached drawing is enough to carry the movable...
would you please see the attachment for IMO A.581(14) and explain the reason of limitation for distance of securing points?
I 'm going to find a good body lines (hull) for a flat barge which i know it's principal dimension.
how can i start?
i know my question is not about boat design but i like to use experience of good naval architects of this forum.
i want to design a...
How can i find the best height and breadth to design my boat while i know length and hull shape(V type)? does statistic data help me?
why do most stern trawlers have been designed by one engine?
what is the best way to reduce corrosion speed in voids of a barge. voids are not coated.
I'm looking for a check list containing common repair items of a jack up during dry docking? would you please help me?
how can I find specification of below main engine
cat d399 hp 1600 rpm 1350 serisl.36z.1294
is it necessary to consider a space between containers to lock all twist locks?
please find the attached formula and tell me it's correct or not.