The price is jacked up by 62,5% ;)
Maybe it will work to your advantage. Check out this link: http://www.kaptenboatcollar.com/direct-steering.html
I will do the test in the next couple of days and post the results!
What would happen if the rudder gets "over balanced"? We never go faster than 6.5 knots (S/L 1.2).
What would the area forward be in %? It seems to be enough space between the prop and the rudder. What would the minimum clearance be?
I found this picture and this rudder have the top filled in and fish-tails. Maybe this is close to what you all have suggested?
I am not aware of that the prop would have been changed. I can not find the diameter and pitch for it. I am in the process of installing hydralic...
Thank you for all the replies!
Here are 2 pictures.
I need help to redesign the rudder of my boat.
It is a full displacement boat, 10 meters in length and hard to control at low...
I guess the strips will overlap two times in the corners of the transom. How do I get that part watertight?
Thanks for the replies!
What is the easiest way to attatch for example the transom? Do I bend the sides to 90 degrees and get one row of...
Trying to find information on how to design and build a riveted aluminum dinghy (scantlings, what is overlapping what ...etc.), but...
Thank you, Iwill consider that!
Thank you for your reply!
Right now we own a 33 ft motorsailer made entirely out of mahogany and sometimes I feel it is to much...
I have been playing around with this design and wondered if it would be possible to add a simple rig for roll dampening and backup in case the...
I make a model in Rhino3d, check for fairness and then unroll the panel and print them. Then I laminate the papers and cut out the panels. Then...
Thank you all for taking time to answer my questions.
I will start by building a small dinghy and then build my dreamboat!
Is it possible to build a 34 ft stitch-and-glue powerboat? Wouldn't it need stringers and so on to strengthen the hull? How thick would the hull...