He says the boat handles great until you try and push over 30 then it’s a handful. He likes to cruise below those speeds. Pretty much every owner...
Also if it would help I can draw the hull shape in CAD just not sure what format y’all prefer.
Another Picture if an Albury
I have moved weight forward and raised the engines one hole but still the boat does not like to go much more than ~28-30 without getting very...
I appreciate all the help!
Going to try moving some weight forward and raising the engines to start.
Here are some pictures.
I’m positive the water separates from the pod. And the hull appears to be very flat
here is a Dorado 30 with a single 300 running 1-2 chop. roughly 22 SMPH with trim tabs down.
I purchased the boat after being converted to outboards.
I believe the largest Diesel that was put in was a 300hp diesel, Some boats came from...
Center mounted Diesel jack shafted to an outdrive
Yes, that is my exact boat.
The idea is to modify the boat accommodate more power and speed
here's the boat running 22 SMPh in 2-3 rollers
Yes the steering is very sensitive.
Most of the outboard conversions are done this way, with a bracket or Porta-Bracket off the back.
I can raise the engines, but I feel they are very close to cavitation already.
If the water is dead calm the boat will go straight, but any little wind or wake will cause instability. I have piloted a lot of boats and never...
The engines are counter rotating, I have bled the steering, made sure everything is tight, tried multiple engine trims and trim tabs, and I have...
If you're not familiar with the dorado 30 it is a west coats of Florida style boat with a very sharp bow entry that flattens out in the back. The...