If you can write in English, please do it. I am very limited in Spanish.
If you are interested in more data exchange and...
Sorry, still there are few misunderstanding.
I am not selling any .jpg files as full set of plans for a 46' Trawler.
I just mention a "zipped"...
Are you sure there is ne free plans?
I am afraid, you did not carefully read the "thread".
If you follow since the beginning...
Je ne connais pas Catia (seulement de nom).
Rhino est très simple d'utilisation
Son prix reste abordable (version educ).
FAO may provide some info you are looking for
Please visit the link below
Any problem with French people ?
Starting a new Internet site www.coastaltrawler.com
Please visit are welcome. See you there.
Many thanks for your encouragement.
It's nice to have some people on board with similar taste.
Having spent my childhood years...
I just started a new Internet site for Boat, Yacht and Vessel DESIGN.
Please welcome to...
Which "Double Deck" are you mentioning. There is two quite different models.
As shown in the following screenshot, the curves for the "Single Chine" are faired as much as possible.
There is still some room to...
Previous Vessel was a multi chine (2).
This one is much simpler : there is only one chine.
There is only a "Bottom plate" and the "Top side"....
Cameras for visibility
Since, the bulwark at the bow was lovered by half, there is enough visibility in front of the Vessel now....
There is no Problem. Again thanks for your reply.
We can manage this locally.
One Hull two different Vessels
With some minor modifications, same hull (bottom and chine) could be used for two totally...
Front end visibility
Please find below two pictures showing the front visibility of Free Vessel PLANS.
As you can notice...
I have some spare time and if I can help you somehow please let me know.
As you can notice even if I can use quite well...
You are right, I have to send also the front view from the helm position.
I think it is quite good. But, please, give me...
Free Vessel PLANS (Sister ship LUXEMOTOR)
Now a shipyard in France is building the sister ship of "Free PLANS".
The hull is longer offering more...
Hello Guillermo and Timothy,
I think trimming the boat by stern and a little work to install the engine with
the shaft using some slope should...