The registration numbers on it match a 10'6 title i have
So i have a 14.5 center console i bought for 600 with a 72 johnson 25hp, and a trailer. Looks like it could be earlier then 1972, I was hoping i...
But just for the hull
Meranti 6566 is what will be used then
Obviously the best thing i can do is use meranti, and glass it and epoxy it, which i probably will do, but if using bix box store plywood, glassed...
Very confusing forum
Hows the candlefish 16? any opinions
I do plan on keeping it at my dock in the water, So should i encapsulate it inside and out? Saltwater btw
Me too, but at age 13 when i got my first boat, a starcraft 12 with a evinrude 6 i would take that up to 3 miles out, and that was the alantic, so...
Well.. Out of the boats i looked at so far thats my favorite, maybe ill use good exterior instead and epoxy the whole thing.
I want to build the ob 15 but need to know if the whole boat has to be epoxyed and glassed, I cant afford 7.5 gallons of epoxy, thatd be about 800...
Thinking of building the ob 15 now, The lumber yard isnt what i want with the flat bottom, I like the v hull, the chines, the weight, should be...
Ugh 15.4 x 6.6 x 1.6. Its the lumber yard 16
The plans i saw on old warth suggest 3/4inch bottom and 1/2 sides, or is that for exterior grade
Priced out the whole thing from wood - paint - vhf and estimated it to cost around 1700, and thats rounding up on everything, however. I know how...
Im going to epoxy the part below the waterline and bottom paint it then use blue water alkyd for the rest