Planning maybe required to square up or correct surface irregularities. Or only one surface mated to the plywood with the remaining exposed....
Barry's formula is for a FULLY submerged cylinder.
You need the formula for a partially submerged cylinder.
Volume of a...
My screen doesn't show high resolution of your picture.
Depending on bug quantity, type and deapth.
Tweezers, razor blades, bon-ami cleanser...
I am tempted to say simply remove the bugs in the buffing process.
Does the rest of the hull have sufficiently thick gelcoat to move on to buffing?
You are thinking way old school.
100 years ago sailing yachts had very long bow and stern overhangs that lengthened the waterline while healed...
I worked on several projects where foam coring was applied to a female semi-plug, then glassed over.
Depending on the size of vessel, raw foam,...
Here's an idea taken from a sailboat, but could be adapted. It allows the boom to lift and would not require a second mast. Simply attach top of...
Welcome to the forum.
NO. NO . NO
The are not the same stuff.
Home depot sells a PVA primer so the top coat paint sticks better....
Why are you adding the foam spacer?
Was it present from the factory build out?
Does your hull suffer from a "hard" spot?
Welcome to the group
I use an inflatable "dive-yak" made by Seveler for simular activity on the Northern California coast. Works well for me....
The above tells me that you have the social grace of a dingo.
But we try to not be offensive toward dog like critters.
Too little information.
Many more questions.
How big is the backyard?
Skill level of builder?
Appearance and performance...
Considere a hybrid system. A small gas generator powering your existing electric motor. It could still be modularly portable.
Keep in mind.
ALL paint allocation techniques leave identifying traces on the finished surface. I can always tell how paint was applied.
Sorry, thought you said that you used two rollers
Same basic issue.
Pressure induces thicker ridges that don't flow out. Tipping is Bairly...
Paint tipping is an acquired skill. It takes practice to develop. Lots and lots of practice. Thousands of square feet of practice.
It can be...
I don't have the screen resolution to see either roller tracks or fisheyes. If you have thousands of eyes\square foot, then you have a serious...
Ditto to Missinginaction!!
15% reducer will be way to much. You will be trading roller tracks for sag lines.
What did you tack with?...
The humidity is high. Especially, with the lowish temperature. Poly has issues with water and humidity. Should be below 50%. Close to 40%...
Everybody's skin got thinner once screen life replaced real life