Robber, by Peter "Pink Panther" Ståhle was built concurrently with Accent at my dads shop in 73/74.
Peter also designed a 73 footer for the first...
Have a look at barrtools.com, reasonable prices, haven't bought anything there myself though.
I doubt the hardware store type foam would stand up to gasoline.
Just to be a petulant arse,
DB probably knitted rather than woven.
Ara- aramid? Mat- mat? 72k- fibers per yarn? 200- areal weight (g/m2)? 0˚/90˚- fiber orientation in fabric?
Nå pråblem, mate.
Awl-craft might be a little more forgiving to work with.
Looks like a sidevalve (sidventil) gasoline motor. Don't know anything about it myself, but it looks like a very basic design, I would start by...
Since the Laser 28 was designed by proper naval architects, there won't be much gain in a section different from what was designed for it. Some...
Fasten on sheets of foam onto the mold by screwing through the mold from the inside, use heat to bend the foam if neccessary. Laminate the...
Go for medical doctors as investors, they are often arrogant enough to think they are gods gift to investing. (I'd say lawyers too, but...
What's the condition of your sails?
Unless you have a really crude metric ruler, I just don't see the problem.
Andy, most rotomolded products are polyethylene, (often referred to by ungainly acronyms like HDPE and UHMWPE) wich is a great non-stick surface...
Foam panels with glass skins are good but expensive. Just do the wood again, but don't cheat this time.
Are you talking shininess or color?
We use a 3/4hp vane pump from Graingers. Have a look there or at Mc Master-Carr.
Hundred orders of magnitude?
The example you give is particularly bad because the fibers in the skins run in different directions.