Ok so I am having gear shifting problems,
I'll run over the background that has lead to this
I had a Mercruiser MC1 that I up graded to a...
Ive had a really good look at the transom plate and can't see anywhere this wire would go
Sorry to be a pain but could you provide...
Are there any other continuity wires that need to be connected in this area to complete the circuit
Ive had a quick look online at a few pics...
Ill let you know how I go
I will have a look tonight after work
Ive got a Mercrucier MC1 with a 4 blade stainless steel propeller that I need to ID
It has AD2 and 774 stamped on it?
350 inboard with no fuel flow
Mechanical fuel pump with only about 20 hour's on it.
Wouldn't think the pump diafram has failed
Ive rebuild a 350 Chevy inboard as a few of you will know.
All the teething problems have been telt with.
Last thing to do is replace...
Thank you Par very much appreciated
Its all clear to me know
Looks like dash gauge wire hooks up to this
Light on dash has no wiring
How do I wire this up to coolant sensor
Am I correct in thinking...
Ok sounds like the auto electrical guys I had wire the engine up when I put the engine back in the boat have wired this up incorrectly...
One more picture
Been getting incorrect temperature readings at gauge on my Chevrolet 350 inboard
These pictures show the stamped numbers on the sensor...
Never noticed this hole before
Draining water while running
It is supposed to be there correct ? ?
Some fantastic stuff there thanks.
I will definitely remove the brass elbow and re-plumb as per your recommendation
I am starting to...
Ok so I've removed the thermostat and it is a 70 degree one
Im replacing it with a 60 degree one
I've pulled all the salt water plumbing...
Yes it has a steering cooler so i will check that.
Here are some additional photos
the risers fitted to the motor in photos have now been replace with new stainless steel set as in...
Here's a picture