Will air injection in a concave sailboat or catamaran hull make it faster.
I read about project AMAZON, and that sailboat had a flatish concavish...
i thought this would be good idea.ANY comments or clarifications please add.......
Custom bahamian mooring system. keep EQUAL pull on both...
i read somewhere that you can do polyester fiberglass layup over epoxy BUT it has to be before the epoxy cures. while still tacky.
can anyone load a picture with a condor 40' trimaran and a multi 50' trimaran for a side by side size comparison .
i decided to buy the edel
this is my source....SailboatData.com - EDEL CAT 35 -1 (ADVENTURE 10M) Sailboat https://sailboatdata.com/sailboat/edel-cat-35-1-adventure-10m
thank you for info. i can now decide,
So in your experience a 43' farr (16,000 lbs ) and a 50' farr racer (25,000 lbs)will be faster than a Edel 35' (7,000 lbs)
all conditions are the same for all boats ..ONLY difference is the boat design. ,you choose parameters.
THIS is NOT a trick question.
you guys that know your stuff, please give opinions.
*the boats sailing side by side approx. 100 meters between...
thank you, i corrected..it is distance and angle between tubes that is the only difference in the design.
what about the angle, is angle irrelevant??
might the angle create unwanted lift?
or might it create more drag?
thanks for fast reply.
The speed with option #A is known ,it is X.
***The only question i would like an opinion to is ????
what will be the...
[ATTACH] please give your opinions on the following design.
same upper house size 30' x 30' with 50' length of tubes
option # A...vertical...
thanks to all serious resonses...
how fast will a 1983 snowgoose 37' ,in a 20 knot wind on 12" chop,from most favorable angle for speed?...
thanks, problem resolved. plan found.
i would like to study 20 station offsets for a hull, axe type of front , and 3' wide at a height of 24" above bottom and 7' wide at the 8'...
Not to mention the increased buoyancy?will see when actually done and used in 10' seas.