What does the SOR say, which is the most dominant feature to be satisfied? And that'll be it!
Yes, sorry typo - i type too fast and...
Nearly there. You went wrong with the I
If this is for just one hull, then I = L.B^3/12
You missed the 1/12.
But, to work out the I for single...
So you then need to look at the cost and weight implications of using a CPP v FPP as well then.
Increase weight = lower speed or more drag,...
So....do you have what you need now?
Hard to tell properly from that piccie...
These numbers do not make any sense.
KB = 0.184m
BMt = 0.12m
Therefore KM is roughly 0.30m
If the GMt is – 0.43m, this gives the KG at...
A graving dock basically!
Is this for one single hull?
Can do. But I need the data requested.
I have a lot of sympathy for those caught up in Dorian.
Last year typhoon Jebi destroyed my test tank and I lost my car too.
Hey ho - such is...
Something is not right there.
For a cat you shouldn't have a negative GM and your BMt is too low.
How did you arrive at those numbers?
Sorry, i keep forgetting I am sometimes talking technical terms to a non naval architect.
GM = metacentric height. It is the distance from the...
In a nut shell.
You need to make the spacing ratio(hull CL to hull CL) S/L as large as possible.
But an S/L of 0.20min for resistance to eliminate...
What utter immature childish egotistical nonsense....an excellent example of the profession you claim to be part of.
Just a waste of bandwidth.
Oh dear more nonsense and misdirection.
Is that because you cannot answer your own claim??
So still not answered YOUR claim as you posted...
And so the last resort of those that are unable to answer their claims at hand (which is your claim, in case you have forgotten)...classic...
Let's say your target speed and displacement in
condition 1 is 10 tonnes and 5 knots
condition 2 is 15 tonnes and 20 knots
So, the design...
Suppose - what does this mean? Other than more obfuscation.
So, yet again,....Is this a yes you can, or, a no you can't?
Whether you can or...
So, yet again, you are unable to describe and explain the terms in reference to the OPs Q that you cited.
(Note using original post - not the...