You may find my newly designed catamaran plan from...
is there any document or a sketch about inboard motor seat and sealing design details for a sailing yacth?
Is there any book about complete sail and rig design?
Please take a look at my designs:
I wonder some boats have natural wood looking I know they are plywood? Is there any method that shows okoume plywood as mahogany wood?
I need a detailed document which tells about how to design a complete gaff rig.
Do all wood types after moisture barrier epoxy coating have the same moisture and rot resistance ?
I would like to know if the Gaff Rig type sails have the multiple
Rig type sails have the multiple pieces attached to each other to form...
How to avoid lightening by design?
Is using stainless steel screws prohibited in wooden epoxy coated boats?
I heard that the Aluminium masts have Al2O3 coating. But Aluminium
naturally has this coating without treatment.
Why it is needed this...
As you know hard chined boats are designed by the 3d programs such as rhino,
Than flat patterns are done by unrol developable surface...
I mad an epoxy coated beach type small boat. I painted it with acrylic primer. For the final coat I would paint it with acrylic car paint....
I made a boat with okume plywood. The surface up to waterline is coated by fiberglass-epoxy. Remaining surface of the boat was coated...
I want to build a hard chined sailing yatch (7.5m loa) what are the types of wood suitable for stringer?
Thank you very much?
Can somebody offset this hull 10mm to inside and trim its extensions? then please send to me? I think it is imposible. :o
I have an external hull surface of a hard chine boat. I want it to offset through inside and model the bulkheads. Also I will make...
I am using Delftship to design the hull(developable hard chined hulls). I wonder what is usualy taken as hull shell thickness. Do you use...
I am having some troubles deciding the suitable waterplane entrance angle. My design Froude number is 0.35 and velocity is 2.84 m/s, lwl...
In some designs there is a stringer that connects two plywoods. However it is hard to shape the stringer for that kind of connection. Because...