CPES™-Wood based epoxy products to repair and resist wood rot. https://www.rotdoctor.com/products/cpes.html
I would like your comments on cpes.
I have fished a few times where you speak of and you would name the ship 'Stock in Dramamine'. When the 8.5' beam starts to roll; it would be...
Good move Gary.
Boats in that state of disrepair end up an exercise in diseconomy. You spend thousands of dollars and a thousand hours for...
Gelcoat won't get a stress fracture.
These look great and the gc will thank you.
A friendly tip...stainless steel luvs to gall. Despite the issues with grease in the fabrication area, make sure and grease the bolts if you are...
No. Doubt it. That is a lot.
For a square yard of 1708, the epoxy wetout is 25 ounces. 24 is short..expert work
You would adjust for...
For 1708 in epoxy resin, I weigh the glass and figure wetout at 100%.
So, for my resin, glass weight is 2#, for example..
Resin is 9.01/gallon....
You can thru bolt, but you might want to sleeve the core if I am understanding.
The minimum, of course, would be overboring and filling and...
Too tired now. Try for tomorrow, sorry.
I would have just filleted and taped that.
A gusset would have been better still.
CPES comes to mind.
Along with the banana smell...
Quite a project.
Decoring that would be a pita unless you could use a router. If that is what you mean.
Another option would be to laminate a...
People say epifanes is very hard as a slow cure. Any 'hard' data.
Anyone ever use Nason Ful-thane 2K?
Some pro painters are gonna bid my boat sprayed with it.
But never heard of it on a boat.
I might make them...
Want to edit and clean up the thread?
I am building a Wood's Skoota 32 powercat.
It was a two year plan, but hip failed and that added time to it.
New Hip is better. I think I can...
What do you mean by etched surface lacks adhesion?
You won't enjoy rabbeting plywood unless you can do it with a router.
Keep that in mind.
Heavier timbers are also less prone to breaking when...