Search results

  1. archnav.de

    3D hull and equipment models from the internet

    3D Models needed Dear colleges, Urgently 3D Models are needed under 3D-CAD-Blocks. Please upload your models. Cheers Bernd
  2. archnav.de

    Triamaran Concept

    Hey Ivan, I think you are knowing the fast Container Ship projects from Nigel Gee http://www.ngal.co.uk/designs/commercial/pent/ng193/ng193.pdf and http://www.ngal.co.uk/designs/commercial/pent/ng335/ng335.pdf In this case they are PENTAMARAN CONTAINER VESSELS. But the solution should...
  3. archnav.de

    3D hull and equipment models from the internet

    Hey Doug, It would be great as always, if you can upload the model of the Honda Outboard also to the Gallery called CAD-Blocks. Please convert the file first also via SolidWorks into .sat (4.0) and x_t (12.0) and pack them into one .zip file. So that that all users from boatdesign.net can...
  4. archnav.de

    3D hull and equipment models from the internet

    Here you can discover the different between a 3d dxf or 3ds file and a 3D CAD file . The 3D-CAD file you can alter in all aspects in most CAD-systems and you can make 2D-drawings out of the files, related to the edges. In a 3d dxf file you will always see the triangles. I have downloaded the...
  5. hinterschiff_mit_7l_5864_rev6_gesamt_vorl_ufig

    hinterschiff_mit_7l_5864_rev6_gesamt_vorl_ufig

    Complex aft ship as one CAD file
    • archnav.de
    • Media item
    • Comments: 0
    • Media category: Gallery of Professional Design Work
  6. archnav.de

    3D hull and equipment models from the internet

    Hey Yister, Please give me the direct link towards the article. Below you found our analyses in relation to the shipbuilding sector. Cheers Bernd
  7. archnav.de

    3D hull and equipment models from the internet

    Baldur, The process to work via .stl sounds strange. Normally a solid consists on well defined surfaces and edges. You lose this definition , if you convert the file into 3dxf or .stl. So if we want to switch a CAD-model from one CAD-system to another we never leave the exchange triangle...
  8. archnav.de

    3D hull and equipment models from the internet

    Man in .x_t and .sat Hey Baldur, The . x_t Man is not a solid model. It is a triangel 3D-dxf surface that you can't alter with CAD-Systems. The .sat file doesn't run under my different CAD-Systems. Cheers Bernd
  9. archnav.de

    3D hull and equipment models from the internet

    Dear Joop (Yipster), 3D Studio-file are similar to 3d-DXF files The files consists out of a lot of small flat triangel surfaces. So you can't produce out of that file neither an iges (surface, solid), .sat, .x_t or .stp-file. If we export a CAD Model towards 3D-Studio we first convert the...
  10. archnav.de

    3D hull and equipment models from the internet

    Engines from MAN For larger ships you can download 2D drawings and 3D models from MAN by using the following link http://www.manbw.com/article_004544.html . There is also a special service at their extranet https://extranet.manbw.de The “3D Engine Viewer“ is a software tool by MAN B&W...
  11. archnav.de

    Rhino + what?

    Hi Chain, nice to hear from you again. To keep our gallery: CAD-Blocks and Drawings http://www.boatdesign.net/gallery/showgallery.php/cat/3054 running, we need some Rhino-Models out of your store. Please help. Cheers Bernd
  12. 75m yacht heli

    75m yacht heli

    Heli storage under deck per lift 75m yacht
    • archnav.de
    • Media item
    • Comments: 1
    • Media category: Gallery of Professional Design Work
  13. 75m yacht

    75m yacht

    75m Yacht version created from the 85m yacht . Comparison-75-85m- version
    • archnav.de
    • Media item
    • Comments: 0
    • Media category: Gallery of Professional Design Work
  14. archnav.de

    3D hull and equipment models from the internet

    Here an older but remarkable report about CAD-Kernels http://cadence.advanstar.com/1998/1298/supgreen.html
  15. archnav.de

    3D hull and equipment models from the internet

    Dear Baldur, fine, as a last step, pack the files altogether in one .zip file and upload to file towards http://www.boatdesign.net/gallery/showgallery.php/cat/3054 Cheers Bernd
  16. archnav.de

    Autocad-Rhino-Hydromax?

    Dear Andrew, What are the exact interface possibilities for Hydromax? We don't like .igs for a lot of reasons. We prefer Parasolid (.x_t) Acis (.sat) and Step (AP214). If you have this three formats availabele, you can act with this files in most 3CAD-Systems like native files...
  17. archnav.de

    3D hull and equipment models from the internet

    Update regaridng 3D-CAD interfaces. As an attachment you find a update regarding 3D-CAD interfaces. If you have the models in the three formats Parasolid (.x_t), ACIS (.sat) and STEP (.stp) available you can act in most CAD-Systems like native files. With .igs you get normally a hell of...
  18. archnav.de

    rendering sftwrs

    If you would like to act with high end renderings and animations you should look for Cinema4d or 3D-StudioMax. We are working with 3D-StudioMax, but it's hard to get high end quality there and it is only worthwhile, if you work with this software frequently.
  19. archnav.de

    Anchor Model - Do you have one?

    SailDesign, Bett It would be great if you also could upload your anchors towards CAD-Blocks and Drawings http://www.boatdesign.net/gallery/showgallery.php/cat/3054 Please pack a Rhino, ACIS 4.0 and STEP file into one .zip-file Cheers Bernd
  20. archnav.de

    iges trimmed surface problem in maxsurf

    Surfaces from Rhino If we have a Rhino file we prefer to save the file as ACIS 4.0 or Step. With this surfaces we normally have not any problems in other CAD-Systems. I have saved the file from CGN as ACIS 4.0 combined the patches with our ACIS based software to one surface and saved the file...
Back
Top