It might work to pull up on the bit of strap and unscrew slowly, possibly with a small cat's paw levering under the screw head and against the...
Sit-On-Top kayak
It's troublesome when they follow you home like that ;) -What size is the vertical bar (l x w x thickness)? -Is there a plate and hardware and...
Would a pole be better than a plate?
PS Is the plywood in question inside a locker or under a deck? The idea is to make a trestle that fits rather than 'drillium' if it would be any...
I've sailed worse... :) Agree with advice given to improve shape and foil of the blade portion, although that rectangular contraption allowing...
So there are 4 layers on each tall side of stringers and 4 more layers tabbing at the hull?
Jason, do you have a picture of the situation or some rough dimensions of your new stringers and tabbing? Is this on the Radon? Those were much...
In my situation, I needed 3 layers 1808DBM 45/-45 when the cloth vendor told me just 2 with epoxy, and I needed to align 2 layers to the framing...
Thanks Doug for noting the source. I have yet to read any Marchaj for myself.
I did an internet search for 'centerboard section comparison' on the Duck-Duck-Go which led me to an image off a thread on the Woodenboat forum....
Looks like there is an answer to Scuff's question but I am hoping to understand the weave. -Is it something like this, with the horizontal/gray...
Mission Accomplished, congrats!
I do not know for how long, I have a couple paddle boards with brand-name foam and 3M adhesive that are still in good shape after 6 years but they...
[MEDIA] Video from the website. Once of the boats with the letters on the sail has an interesting mast mount, sort of an A-frame going from mast...
Your traction choices look good. I am also a fan of the EVA foam, just posted about it in another thread...
The piece I have is about 22" square with 1.5 x .5" diamond pattern in 'dark' gray, I am thinking it is darker than your trim. Stand Up...
You could use a strip of EVA traction foam with the adhesive on the back, like they use on stand-up paddle boards. I could dig around this weekend...
Thanks. I have a similar job to do on mine 2-3 projects into the future and the outside glassing/gelcoat/non-skid is still quite nice so I want to...
Very nice work. Did you wet out the fabric first? Did you do anything to hold it in place?
