I have a titled 1968 Dyer Glamor Girl with no engine. It's on a trailer, but good probably for only 50 miles.... Nice fotos and a fuller...
I found it impossible to narrow down on rowvista at your site
Instructive video, Linda V. Thank you. A picture tells a thousand words. A video....I'm still digesting!
Forgot: Huge applause to the engineers, builders. INSPIRATIONAL!!!
GREAT entertainment! WONDERFUL roostertail. A kick in the pants overall. Thank you.
I'm playing with surface drive at the moment, with no conclusions. I like what I see on youtube with the dragontail drives and the speeds they...
Here's a product http://www.goldenmotor.com/ and plenty of wizardry re electric motors http://endless-sphere.com/forums/viewforum.php?f=30
I would look long and hard at Heinzmann, which you've probably encountered, since they took over PERM. In particular, the Heinzmann PMS 120...
http://hybridautocenter.com/HAC4/index.php?option=com_content&view=article&id=72&Itemid=631
Leaf modules are discussed here http://endless-sphere.com/forums/viewtopic.php?f=14&t=52162&p=966084&hilit=Nissan+leaf#p960300 Each module...
I read the Power Japan press release, and got the feeling I was hearing from a Wall Street futures trader. Lots of hype. In the here and now:...
greetings RMR, in response to your last, "how much energy" to push 5 mph. Yes, featherweight and carcassweight gas outboards in the 2-3 hp range...
emf and ergs and joules... I have less than 5 miles on the water with Nissan Leaf modules; about 30 hours in the shop. I'm a tyro. But I am...
Calling attention to the page 1 post of Brunello, in Dec 08: his photos show counterrotating props, and props that are the reverse of present...
Thank you SteveH. The lead to offshoreonly is great also. I'm a month or more away from water tests. Electric power should give me some...
"Natural tendency of surface drives to lift the stern" is due to shaft angle with the planing surface of the water? And "in" turning props then...
Curious to know, Brunello, if you swapped wheels LH to RH and determined any difference in thrust between the two setups? Yes, this is five years...
Thanks for you input, BalticB. I do study the threads on prop selection, which confirm my practical experience: seldom is the right screw gained...
Perhaps "squirt" is inaccurate. If one were to change the counterrotations, so that the bottom half of the props, the half immersed in the...
All right, gurus, I'm piecing together a (hopefully) fast electric and would like to know if any additional thrust derives from twin surface...
