Ya home made small boat. I sold the boat to this guy yrs ago. He’s giving me first chance at getting it back. Insurance is kinda up in the air....
Lol. I guess I wasn’t perfectly clear. What country was it in. Lol. Your reaching a little. I’ll get better pics soon. Weird that the paint on...
Quite popular for storage as there not that expensive and provides good security and out of the elements.
Sea can. Metal box that’s used for overseas shipping on boats. Boat was inside in the cold dry air. Luck if it was 20% RH.
Ya those are the easy fixes. Fire was in the winter so really cold like 0 degrees F.
No reports or anything on the fire. Happened last fall. Just getting info now. The wood can be repaired I think. Some screws and goop. More...
[ATTACH] Thanks Fall Guy. Yes the wood gunnels joints have all opened up. Another pic I got.
[ATTACH] Mahogany ply that was painted. Paint melted off I guess. But yet no damage to spare tire?
[ATTACH] [ATTACH] Starting to get info. I guess it got hot enough to melt a tarp strap. Gunnel joints/scarfs separated.
I don’t know a lot about what happened so bare with me. boat has a composite floor. Corecell 1/2” A Maybe 36oz both sides ish Sides were 1/4”...
It’s one of those deals you know I’ve had this piece laying around my garage for years. Finally find a use for it since it’s fairly strong at 12mm...
Perhaps a coat of epoxy over may help? How long would I have to wait for the epoxy to fully cure?
My question is more about the foam being safe for roots as these are editable plants,anything to be worried about as far a chemicals leeching etc....
Yes thanks, I should have said its for the bottom of a SIP container. Sub irrigated planter. So no sunlight will hit it.
Good day, I need some help with a project. I have some left over foam, A 1200 corcell Id like to use it for a planter box. My question is can...
Biggest OB I’ve seen are 150hp so 105 hp at the jet so two would be close. Hole shot power is slow to respond when compared to a prop. Add in a...
This is awesome. I’m kinda doing the same thing. Modified V. I was playing with the radius on some models. So I understand what you mean.good...
Take a piece of left over cut off from the hull that has these voids and do a post cure on it. Take macro photos before and after. See what happens.
Here is a non modified and modified bow
Hi thank you,sides approx 21"533mm beam approx 65"~70" 1650mm + In the pic you can see the beam narrows as you get to the bow,was going to add on...
