Can you tell me more about your shop, and designs? Chandler
Anyone have any info on these boats?
anybody have anything to say about offshore 33 cat ketch, good bad, quality of build. Anything? Links to offshore forums? Thanks Chandler
I'll try and post a picture from the survey
Thanks guys From what you all have said, is there really anyway to dry a wet balsa core? I'm sure it's possible to stop the water intrusion but...
apex I can figure out a way to support the boat, I think I can vacumn bag the veneer to the inner hull. Which leaves me with the question, do...
Jim I wouldn't be sanding thru the gel coat, I would be cutting thru the gel coat and the balsa core and removing them. Yes of course the surveyor...
Stumble and Gonzo, I don't know if the core has any rot or not, from everything I've read about cored hulls I think your wrong about trying to...
The point is that the upholstery and interior wood work are in excellent condition, the hull has some problems that can be fixed from the...
Thanks for all the info. The reason I asked is because I am planning on purchasing a 82 freeddom ck. The survey showed alot of saturation of the...
What exactly is gelcoat?
Probably been visited before, but anyone have any idea of how much kevlar fabric would be needed to make a wooden hull bullet proof for small arms...
Why can't we all just be friends. If a post comes up that bothers you ignore it. Don't be critical of others "opinions". Constructive criticism...
14 to 20 layers of glass? You might as well join the navy for 4 years because your pay might cover the cost of the epoxy and glass for 14 to...
Hi Eric, What do you think the life expectancy of carbon fiber masts is? Specifically the ones on freedom 33s. Does anyone know anything about the...
Before I convert my offsets to metric I want to make sure the format I'm using is something you are familiar with. My spread sheet would look...
People are still using paper and pencil :)
A house carpenter that doesn't use 1/16ths is one who needs to have their work covered by aluminum trim and vinyl siding.
Hey kb1one, I do. Personally I don't think anyone should be drawing lines on a computer if they have never done it manually. Perhaps ships with no...
delft kb1one, My offsets are already in thousandths of feet, ft.and inches and fractions,etc. as I did them myself. A couple of years ago I...