There are 4 bolts that go through the cockpit sole. It’s also supported by the 2 bolts forward of the column. I really don’t want to remove it.
As you can see from the images below, the base of my Edson steering pedestal is almost gone from corrosion. I was hoping I could replace just the...
Thanks. I'll get some photos in the next couple of days and post them here.
Okay, I'm encouraged now! Thanks. Is this the Howard's citrus cleaner you were referring to? Orange Oil Wood Polish | Howard Products...
I don't have room in some areas to get in there with 36 grit. The "laminate" before wasn't plastic laminate. It was butt ugly vinyl, as in...
Any particular names that you can recommend - that actually work?
I'm not sure what kind of wood is used for the outer veneers but it is end grain balsa inside....
I want to remove this butt ugly vinyl / naugahyde on several surfaces of the interior of my boat that was applied with contact cement. The...
I just bought a boat that was built over 40 years ago. This boat has nice mahogany joiner work below that ranges from looking beautiful - to worn...
I was looking at a multihull recently that had hulls built with Durakore. This boat was built about 25 years ago and was in excellent condition....
Thanks for replying again. The bottom there is pretty solid. I probably won't do this until the first of the year when we get super wide tidal...
Here she is... [ATTACH]
The anemometer thingee is stuck at the top of the mast so not working but in the trial sail we easily hit almost 6 knots in very light wind. The...
I just bought a beautiful Cross 34 trimaran which Norm lengthened to 36' because of the sugar scoop transom. (The sugar scoop was part of the...
But can't pitching lead to pitchpoling on a cat with hulls that have lots of rocker? I couldn't find anything about Worldcat and Golden Cockerel...
The hulls are slender and symmetrical but pinched at the bottom unlike the round hulls on most cats. The sterns are narrow too. I don't know the...
I might check out a 38' Buddy Ebsen Polycon cat in Florida. My intention is to do mostly solo extended cruising with an occasional crew or two...
I really appreciate you guys posting those. Thank you very much!
I have looked everywhere online and can not find the beam of a 37' Crowther Spindrift catamaran. Anyone know? Thanks!
After all these years, I still think Searunners are beautiful boats.
