Headline * Dyna = Dehler 33 + 60mm sinkage * Lwl Length of waterline 9.122 Lwl / Bwl Ratio of waterline length to waterline beam 3.783 Bwl / Tcb Ratio of waterline beam to Draft of canoe body 5.887 Bdeck / Bwl Ratio of beam at decklevel to waterline beam 1.2054 Cp Prismatic coefficient of c.b. 0.5475 Cm Coefficient of the maximum area section 0.7674 LCB/Lwl Longitudinal center of buoyancy, distance from fpp divided by Lwl 0.5454 LCF/Lwl Longitudinal center of flotation, distance from fpp divided by Lwl 0.5781 Awl / Vol^2/3 Ratio of waterplane area to the 2/3rd power of the volume 6.2028 Alpha Flare angle at max. area section, DWL-level, degrees outward from vertical 36.8 Gamma Deadrise angle at the keel, in degrees upward from horizontal 0.0 combine larger values with U_SEC = 0. D / Lwl Ratio of depth of canoe body to Lwl 0.1352 TOH / Lwl Ratio of transom overhang to Lwl in percent 8.858 TCL / TOH Ratio of transom clearance to transom overhang 0.1795 if unknown use default 999 TRANSOM Parameter for transom size, see user manual, or use = 1. 1. U_SEC Parameter describing radius of U-sections in forebody 4. = 0. for V-sections BOW_FLAR Parameter causing additional flare at bow if > 0 -0.5 CADOUT specifies the output file. 1=Rhino, 2=DelftShip, 3=ProSurf 1 *** the following lines can be used for comments **