Aussie 6.7 mt Sportfisher centre console

Home · Search · Register

Home » Design Galleries » Projects in Progress		Photo Options

Aussie 6.7 mt Sportfisher centre console

Photo Details
gary1 Senior Member Registered: May 2006 Location: australia Posts: 157	The centre console ready to be strapped with 2 layers of Biaxial tape and then totally covered with several layers of Biaxial fabric and Epoxy
	· Date: November-16-2008 · Views: 1927 · Filesize: 35.3kb ·
	Additional Info
	Rating: 10.00
	Keywords: Aussie 6.7 mt Sportfisher centre console

Author

Thread

ratrace2

Senior Member

Registered: December 2007
Location: NJ USA
Posts: 542

November-16-2008 5:19pm

Rating: 10

Gary1, I would put a "toe kick" in that.

From this view: cut out about 4" from the bottom and about 4" back. (like on your kitchen cabinets at home.)

------------------------------
Who Said That?.....................

Click here to Send this user a Private Message

gary1
Senior Member

Registered: May 2006
Location: australia
Posts: 157

November-16-2008 7:27pm

G/Day Ratrace2,

Mate I thought about doing that but after standing right up against the front of it, I still have plenty of clearence between my feet and the console. To get my toes up against it i have to lean slightly backwards and become off balanced. It's still something I could do later on anyway

Gary

ratrace2

Senior Member

Registered: December 2007
Location: NJ USA
Posts: 542

November-16-2008 7:56pm

OK, I was just thinking that she is going to buck like a horse when you go full throttle, her bow up attitude is going to have you looking for something to grab.

I would have the wheel far enough forward so that I could put my belt buckle against the back part of the console.....

------------------------------
Who Said That?.....................

gary1
Senior Member

Registered: May 2006
Location: australia
Posts: 157

November-16-2008 8:56pm

I'm with you, I was looking at adding a couple of grab rails to it when it's completed. A good point on the steering wheel I never thought about that, I will wait till I have the console mounted in the boat with the wheel in as well to figure out the most comfortable spot for them.

thank's Gary

ratrace2

Senior Member

Registered: December 2007
Location: NJ USA
Posts: 542

November-16-2008 9:08pm

did ya get that PM I sent you with the link. . .?

------------------------------
Who Said That?.....................

All times are GMT -5. The time now is 01:12 PM.