Design in progress II 4/4, p1 - Boat Design Net Gallery

Home · Search · Register

Home » Member Galleries » Dim		Photo Options

Design in progress II 4/4, p1

Click on image to view larger image

Photo Details
Dim Senior Member Registered: May 2003 Location: somewhere Posts: 314	· Date: August-13-2003 · Views: 6188 · Filesize: 162.2kb, 128.5kb ·
	Additional Info
	Rating: 10.00
	Keywords: Design in progress II 4/4, p1

Author

Thread

Dim
Senior Member

Registered: May 2003
Location: somewhere
Posts: 314

August-13-2003 5:39pm

Distance between a front couple of seats and after bulkhead of a main cabin was very large.

I already have corrected this inaccuracy.

Click here to Send this user a Private Message

MarkC
Senior Member

Registered: October 2003
Location: Germany
Posts: 196

October-7-2003 1:13pm

I like this boat! One comment - I'm not so fond of the strut holding the radar, despite of its practicality. It is not so bad (big) as the 'linguinni strut' on other boats, but it's still in that vein. Perhaps you could replace it with a little mast, either before the windshield - or 'in' the windshield. How bout a larger one on the rear cabin, with lights, nav lights, aerials? Could this work? The strut can suport the radar and perhaps a sun-shade - but... just a thought.

Dim
Senior Member

Registered: May 2003
Location: somewhere
Posts: 314

October-7-2003 4:24pm

Thank you, MarkC, for the interesting comment!

I did not think about many details in this boat.

It is preliminary 3D-sketch, if it is possible so to say.

It was very interesting to me to discuss creation of this hull on a forum

( Look: http://boatdesign.net/forums/showthr...ghlight=warped ).

But I tried to apply solutions, which can be produced.

Thanks for your interest, again.

romesh
Junior Member

Registered: October 2003
Location: Ontario, Canada
Posts: 1

November-2-2003 9:36pm

Rating: 10

Very Nice work, I was wondering what software you are using for this.

All times are GMT -4. The time now is 12:38 PM.