Through hull's...... on a rebuild.

Roly · #1 04-30-2006, 03:20 AM

I am preping my replanked hull to glass. I have rebated around the Rudder and prop tubes and layed up with continuous rovings leaving a channel for a flexible sealant between the epoxy and the fitting.What is the best sealant to use? I will glass over the whole lot to protect the "sealant O ring".

Roly · #2 04-30-2006, 03:24 PM

Seems like Sika 291 is the appropriate animal here. I want to glass over it for
protection. Just one layer of 30oz triaxial. Any reasons not to?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
help with hatteras rebuild	scubajohn	Boatbuilding	5	04-16-2006 02:19 PM
Ice Box Rebuild	Lew Morris	Sailboats	15	07-11-2004 08:14 PM
20 ft aquasport rebuild	Brad Morgan	Boatbuilding	1	05-26-2004 08:42 AM
The Wake from a hull's design?	wakeboarder	Boat Design	14	03-14-2004 07:30 PM
Help with rebuild	PsyWarrior	Boatbuilding	0	09-06-2002 11:14 AM