Boat Design Forums  |  Boat Design Directory  |  Boat Design Gallery  |  Boat Design Book Store  |  Thanks to Our Site Sponsors

Go Back   Boat Design Forums > Construction > Boatbuilding > Wooden Boat Building and Restoration
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 07-15-2009, 01:29 AM
ArcataSlacker ArcataSlacker is offline
 
Join Date: Jul 2009
Rep: 10 Posts: 3
Location: Arcata, CA
thinking about snagging a 26' sloop that needs lots of help.

http://humboldt.craigslist.org/boa/1270556152.html

So, I'm looking at this and I was curious just how much work and money you think it would require to get shipshape again?

Ive been looking for a long term (about 6 month to a year) project to take up my free time and this looks like a good one. I have some construction experience and I am fairly 'mechanically inclined' so to speak. I just have no experience with this sort of thing...

Thoughts?
good project for a first timer to learn on?
waste of time/money?

Thanks everyone!
G-Ra
Reply With Quote
  #2  
Old 07-15-2009, 05:52 AM
Stumble Stumble is offline
Senior Member
 
Join Date: Oct 2008
Rep: 550 Posts: 921
Location: New Orleans
I don't see a mast, rigging, sails ect for the boat. My guess is just for these things alone you would spend more than the price of a ready to sail though distressed boat. It might be worth taking the boat then stripping the parts from it to sell on ebay which would probably net you 1-$2,000. As a restoration project however it looks like, unless this is a labor of love for the design, the boat will cost at least as much if not more than something that would be in much better condition.

Just off the cuff I would imagine that it will take at least $4,000 in rigging and sails, probably another $500 in line, $1,000 in various deck hardware, $500 in paint, and $1,000 in parts, supplies, ods and ends and material. This is assumming that there isn't anything structually wrong the hull or deck. So for a minimum of $6,500 you could have it outfitted not including the hundreds of hours of work it will take.
__________________
********************
Nothing is half so much fun as screwing around with boats, except screwing around in a boat.
Reply With Quote
  #3  
Old 07-15-2009, 08:53 AM
PAR's Avatar
PAR PAR is offline
Yacht Designer & Builder
 
Join Date: Nov 2003
Rep: 2891 Posts: 8,798
Location: Eustis, FL
I was able to zoom in on one of the photos and I see the faint signs of hull distortions. This would be common for a boat of this age and construction type, but necessarily easy to fix.

Considering the nature of your desires and the potential issues with this boat, you should strongly consider another yacht for your efforts. Preferably one with all of is equipment, sails, rig and not in as bad of shape. You'll pay more just to start with a better "base", but it's worth it to the novice restorer, because success is difficult, so offering yourself the best chance at this should come first.
Reply With Quote
  #4  
Old 07-15-2009, 09:30 AM
Manie B's Avatar
Manie B Manie B is offline
Senior Member
 
Join Date: Sep 2006
Rep: 1391 Posts: 1,539
Location: Pretoria South Africa
no no no
its only good for firewood
__________________
Bye bye Folks - off to see the world ~~~/)~~~ :)
Compulsive Neurotic Manic Depressive,
but basically happy :)
http://compaxboats.wordpress.com/
http://www.boatdesign.net/forums/boa...ser-27869.html
Reply With Quote
  #5  
Old 07-15-2009, 09:40 AM
apex1
Guest
 
Posts: n/a
Quote:
Originally Posted by Manie B View Post
no no no
its only good for firewood
And that helps to get hands on the FREE lead ballast in handy chunks!
Reply With Quote
  #6  
Old 07-15-2009, 12:24 PM
Manie B's Avatar
Manie B Manie B is offline
Senior Member
 
Join Date: Sep 2006
Rep: 1391 Posts: 1,539
Location: Pretoria South Africa
Code:
And that helps to get hands on the FREE lead ballast in handy chunks
jeeez apex1 that was good thinking, damn if only i was closer i would have gone to get it, need it for my micro
__________________
Bye bye Folks - off to see the world ~~~/)~~~ :)
Compulsive Neurotic Manic Depressive,
but basically happy :)
http://compaxboats.wordpress.com/
http://www.boatdesign.net/forums/boa...ser-27869.html
Reply With Quote
  #7  
Old 07-15-2009, 12:33 PM
apex1
Guest
 
Posts: n/a
Quote:
Originally Posted by Manie B View Post
Code:
And that helps to get hands on the FREE lead ballast in handy chunks
jeeez apex1 that was good thinking, damn if only i was closer i would have gone to get it, need it for my micro
Well, you know me mate! Thinking deeper sometimes is helpful................
Bad luck for you (the distance).

Richard

And to add some more:

some cabinet makers would kill theyr mom to get hands on weathered hardwood! Your local "Lord Nelson" pub would like to have the mid section cut out for a cosy seating arrangement (22 minutes chainsaw job), the rest as decoration. If not: the mid section makes a romantic garden pavillon!
and so on.
If it was in my backyard I would make some bucks out of her.
Reply With Quote
  #8  
Old 07-16-2009, 09:56 PM
ArcataSlacker ArcataSlacker is offline
 
Join Date: Jul 2009
Rep: 10 Posts: 3
Location: Arcata, CA
ah, good points everyone...
that selling the lead sounds almost like a good idea...
where would i take it?
I'll take a look at it this weekend, and snap some better pics if he has the rigging and mast and than see where I'm at...
I dont think this it going to be something i get though.
thanks for your help everyone!
Reply With Quote
  #9  
Old 07-16-2009, 10:04 PM
ArcataSlacker ArcataSlacker is offline
 
Join Date: Jul 2009
Rep: 10 Posts: 3
Location: Arcata, CA
infact calling some of the cabinet makers around here around sounds like a good idea...
lets see what happens.
Reply With Quote
  #10  
Old 07-17-2009, 08:38 AM
apex1
Guest
 
Posts: n/a
I always have good ideas, fellow. Unfortunaltely I do´nt sell them every time!

The lead you can sell to other amateur builders near you.
The frames (if nothing else is worth saving) would make a extraordinary decoration on a wall, arranged from midsection to fwd on one wall, from mid to aft on another, each smaller inside (above) the larger.
Hotels and sailing club lobby is a place to think about. Interior designers (Architects) are a group to contact! They always look for someting unique.

Richard
Reply With Quote
  #11  
Old 07-17-2009, 01:27 PM
PAR's Avatar
PAR PAR is offline
Yacht Designer & Builder
 
Join Date: Nov 2003
Rep: 2891 Posts: 8,798
Location: Eustis, FL
Cut the bow off her and make a cozy breakfast nook for your kitchen.
Reply With Quote
  #12  
Old 07-17-2009, 02:11 PM
apex1
Guest
 
Posts: n/a
You got it Paul!
Reply With Quote
  #13  
Old 07-17-2009, 05:28 PM
PAR's Avatar
PAR PAR is offline
Yacht Designer & Builder
 
Join Date: Nov 2003
Rep: 2891 Posts: 8,798
Location: Eustis, FL
If it was close to me, I'd considering using it as a half model for the side of the shop . . .
Reply With Quote
  #14  
Old 07-17-2009, 05:35 PM
apex1
Guest
 
Posts: n/a
Egoist!
Reply With Quote
  #15  
Old 07-25-2009, 01:53 PM
gonzo's Avatar
gonzo gonzo is offline
Senior Member
 
Join Date: Aug 2002
Rep: 1397 Posts: 7,216
Location: Milwaukee, WI
That boat looks expensive for free
__________________
Gonzo
Reply With Quote
Reply



Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Lots of questions from a newbie! obxfireguy Sailboats 38 07-31-2009 09:27 PM
White Cedar (and lots of it) ProjectFiji.com Materials 49 01-14-2009 12:27 AM
Naval project that needs lots of help! depthofit Boatbuilding 3 10-11-2008 04:02 AM
Floor Replacement Help (lots of it!) Johnny823 Boat Design 0 08-05-2007 11:09 PM
Green horn needs lots of help Roger Brooks Fiberglass and Composite Boat Building 0 01-17-2006 07:52 PM


All times are GMT -5. The time now is 08:04 AM.


Powered by: vBulletin Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.
Web Site Design and Content Copyright ©1999 - 2012 Boat Design Net