 |  |
| Boat Design Forums | Boat Design Directory | Boat Design Gallery | Boat Design Book Store | Thanks to Our Site Sponsors |
| ||||
|
#1
12-20-2010, 03:34 PM
| |||
| |||
| polyurea hull spraying video http://www.youtube.com/watch?v=uyrogrbahyQ this stuff looks similar to sanitred permaflex. although I dont know how flexible polyurea is. polyurea sets up fast. It has the same glossy shiny look. permaflex is here. roll or brush on and takes time to setup.   |
|
#2
12-20-2010, 03:50 PM
| |||
| |||
| http://www.youtube.com/watch?v=DGlMK...ayer_embedded#! polyurea can be pretty tough stuff! http://wn.com/K5%E2%84%A2_Polyurea__...ll_Protection# |
|
#3
12-20-2010, 03:56 PM
| |||
| |||
| coating was unbreakable also hit an aluminum coated plate with explosive and it stayed intact. I imagine this on a hull bottom would protect it well from intrusion like hitting a log or planks leaking |
 |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| VIDEO - Hull Design ,Boat presentation - Lecture | BILLONI | Open Discussion: All Things Boats & Boating | 1 | 11-23-2010 01:53 PM |
| spraying gelcoat | toolsinbox | Boatbuilding | 0 | 01-16-2010 06:43 PM |
| Infusion of hull mold video | jim lee | Fiberglass and Composite Boat Building | 9 | 06-18-2009 04:35 PM |
| spraying gelcoat | gethookedjr | Materials | 3 | 03-07-2007 01:51 PM |
| Spraying gelcoat | Sunfish52981 | Fiberglass and Composite Boat Building | 1 | 04-23-2006 08:29 AM |
Linear Mode
