| ||||
|
#1
| |||
| |||
| mercruiser alpha one gen 2 won't start 2003 reinell with a 4.3L alpha one gen 2 mercruiser turns over fine but won't start. Put a little gas in carb and it fires but will not continue to run. I started boat over winter a couple of times and also added some fuel stabilizer. Currently close to quarter tank. Any ideas would be appreciated. Steve |
|
#2
| |||
| |||
| your carb could be gummed up, can you strip it? |
|
#3
| |||
| |||
| thanks jack. Do you mean take the carb off and clean it? I probably can |
|
#4
| |||
| |||
| Quote:
if you have air blow it out, sight up the jets, be careful not to ream them but a wire off a wire brush is often handy petrol(gas) engines dont like being laid up |
|
#5
| |||
| |||
| yeah I can probably rebiuld it. Have you used sea foam or any other carb cleaner with any success. |
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Mercruiser 3.0 Alpha | ian_upton | Sterndrives | 0 | 07-04-2007 03:24 PM |
| mercruiser alpha one 1.84 to 1.98 | hlaten | Sterndrives | 2 | 07-24-2006 12:17 PM |
| Mercruiser 3.0 Alpha One Problem revised | waterdogz | Powerboats | 1 | 06-24-2006 06:10 PM |
| Mercruiser 3.0 Alpha One Problem | waterdogz | Powerboats | 5 | 06-24-2006 03:58 PM |
| Mercruiser Alpha Gen II Gear Ratio Help | CreoleIII | Sterndrives | 4 | 06-01-2006 12:14 AM |