| ||||
|
#31
| |||
| |||
| From the jackshaft/tailstock parts page for alpha and Bravo Any Mercruiser dealer will have this
__________________ Boat builders are not necessarily Boat designers who are not necessarily Engineers who are not builders who are not designers..... |
|
#32
| |||
| |||
| Hi, A production motorcycle engine has a WOT Life at peak power speed of around 20-35 hours depending on Manufacturer (Honda is best!!). Typically, a road car engine (depending on how recently it was designed) will do around 180-300hrs at WOT max speed depending on the manufacturer. Bike engines have a very hard life when transplanted into a car. In a boat, you will be rebuilding often...... Pistons rods & cranks will suffer all badly... To help out, you could properly bush the small end eyes and drop the compression somewhat. I do feel that you will struggle for engine life though depending on what boat you are trying to push. Cheers, Ruaraidh |
|
#33
| ||||
| ||||
| Quote:
As powerabout has stated, a Mercruiser dealer can hook you up with the right jackshaft/tailstock parts. What size/weight boat is this going into and what are your performance expectations ?? __________________ Paul Kane Chelsea, PQ Building the Glen-L Hot Rod : http://www.boats.chelseacoachworks.com |
|
#34
| |||
| |||
| Thank you. |
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Can I use a Mercruiser outdrive to replace an alpha 1 ? | metrodirt | Sterndrives | 1 | 09-01-2009 07:47 AM |
| Oil change on mercruiser outdrive | jersan | Sterndrives | 3 | 04-23-2009 01:08 AM |
| Questions about outdrive/prop | Scotts | Props | 2 | 04-20-2007 01:56 PM |
| mercruiser outdrive trs2? | gatorkiller | Sterndrives | 0 | 11-17-2006 08:19 AM |
| outdrive water pump on i/o 3.0 alpha mercruiser? | guestCarol | Propulsion | 8 | 08-13-2004 10:41 AM |