Boat Design Forums  |  Boat Design Directory  |  Boat Design Gallery  |  Boat Design Wiki (beta)  |  Boat Design Book Store  |  Thanks to Our Site Sponsors  |  Sitemap

Go Back   Boat Design Forums > Design > Propulsion > Sterndrives
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 07-02-2009, 09:29 PM
hgblanchard hgblanchard is offline
 
Join Date: Jul 2009
Rep: 10 Posts: 3
Location: florida
Bravo three sterndrive question

Hello everyone,
I have a 1999 monterey 276 cruiser (454 engine) with a single Bravo three sterndrive.
I had some kind of pressure build up that caused my fill resevoir cap to pop off. All of the fluid surged out and caused my outdrive to go bad (top end).
I am in need of a replacement and wanted to know if anyone can tell me:
1) what could have caused this?
2) what the gear ratio would be?
3) where is a good place is to start looking for one?

Thanks for your help in in advance

"its not if you ever have boat problems.... it when!"
Reply With Quote
  #2  
Old 07-03-2009, 07:42 AM
CDK's Avatar
CDK CDK is offline
experimental engineer
 
Join Date: Aug 2007
Rep: 262 Posts: 748
Location: Adriatic sea
I guess you meant the oil monitoring reservoir.
It means that water is entering the lower gearbox through the damaged prop shaft seal, pushing the oil upwards to the reservoir. Because water is not a suitable lubricant in a Bravo-3 gearbox, the end is near....
Reply With Quote
  #3  
Old 07-03-2009, 08:30 AM
hgblanchard hgblanchard is offline
 
Join Date: Jul 2009
Rep: 10 Posts: 3
Location: florida
CDK,
Thanks for the info. The end has certainly passed along with a $950.00 Sea Tow back in (good thing I was a member)

Do you have any idea what the gear ratio would be on this drive? I am trying to source a replacement but there are quite a few options.

Thanks
Reply With Quote
  #4  
Old 07-03-2009, 01:47 PM
CDK's Avatar
CDK CDK is offline
experimental engineer
 
Join Date: Aug 2007
Rep: 262 Posts: 748
Location: Adriatic sea
I am familiar with the symptoms because they occur with all Mercruiser stern drives, not with the specific details of your drive.
Reply With Quote
  #5  
Old 07-04-2009, 01:37 AM
gonzo's Avatar
gonzo gonzo is offline
Senior Member
 
Join Date: Aug 2002
Rep: 494 Posts: 3,843
Location: Temporarily in London
The gear ratio is on the side
__________________
Gonzo
Reply With Quote
  #6  
Old 07-07-2009, 08:27 PM
hgblanchard hgblanchard is offline
 
Join Date: Jul 2009
Rep: 10 Posts: 3
Location: florida
Thanks,
It is a 2.00. Most of the markings are peeled off of it so it was a bit difficult to see.
The re-build estimate that I got was for $2700
Any recommendations to where to look for a good used one?
Reply With Quote
  #7  
Old 07-08-2009, 02:30 PM
gonzo's Avatar
gonzo gonzo is offline
Senior Member
 
Join Date: Aug 2002
Rep: 494 Posts: 3,843
Location: Temporarily in London
Try these guys http://www.seaboardmarina.com/
__________________
Gonzo
Reply With Quote
Reply



Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Bolt up Mercruiser 165 or 200 inline 6 to Bravo I sterndrive? Northwester Sterndrives 1 01-05-2009 12:12 PM
Hobie Bravo Caldera Boats Multihulls 17 11-09-2007 06:35 PM
bravo 3 drive buck47 Sterndrives 0 06-07-2006 09:24 PM
Bravo Sterndrives colindengate Powerboats 0 03-18-2004 03:00 PM
Sterndrive question duluthboats Powerboats 10 08-29-2003 11:12 AM


All times are GMT -5. The time now is 10:49 PM.


Powered by: vBulletin 3 Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Web Site Design and Content Copyright ©1999 - 2009 Boat Design Net