Boat Design Forums  |  Boat Design Directory  |  Boat Design Gallery  |  Boat Design Book Store  |  Thanks to Our Site Sponsors

Go Back   Boat Design Forums > Design > Propulsion > Sterndrives
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 10-11-2007, 09:06 AM
Slider Slider is offline
Junior Member
 
Join Date: Oct 2007
Rep: 10 Posts: 6
Location: Toronto,Ontario,Canada
1974 140hp temp question

I have a recently rebuilt top end on this 4 cyl engine which according to the temp gauge runs at 185-190 degs . I also changed the temp gauge recently but not the sender. ....it is an automotive one not marine ( price was right) but I doubt this makes a difference. The old temp gauge was toast and had markings only ...no degrees on the face.

The temp is consistant so maybe it is the gauge?...are all senders the same?...maybe I should install the new sender?

I pulled the thermostat but can't read the temp rating on it so not sure what should be in there?

Does anyone know what is the normal operating temp for this engine and what rating thermostat should be in there ( I suspect 140 deg thermostat?)

Thanks
Reply With Quote
  #2  
Old 10-12-2007, 02:41 AM
Frosty's Avatar
Frosty Frosty is online now
Senior Member
 
Join Date: May 2002
Rep: 1693 Posts: 5,875
Location: Thailand
Temp senders are mated to the guages. I strongly suspect they are non compatable. I would suggest putting them to the boiling kettle test to see if they are compatable. At least you can see where boiling point is. Or be more accurate and use a thermometer.
Reply With Quote
  #3  
Old 10-12-2007, 08:47 AM
Slider Slider is offline
Junior Member
 
Join Date: Oct 2007
Rep: 10 Posts: 6
Location: Toronto,Ontario,Canada
Quote:
Originally Posted by Frosty View Post
Temp senders are mated to the guages. I strongly suspect they are non compatable. I would suggest putting them to the boiling kettle test to see if they are compatable. At least you can see where boiling point is. Or be more accurate and use a thermometer.

Thanks Frosty...better yet I will install the new sender ( presuming the thread size is the same?) and see what happens....I bought a new 140 deg thermostat anyway ...for what it cost I will install it as the old one was rusty and crusty ( used on inland lakes in central Ontario....clean but high in mineral content)
Reply With Quote
  #4  
Old 10-12-2007, 09:12 AM
Frosty's Avatar
Frosty Frosty is online now
Senior Member
 
Join Date: May 2002
Rep: 1693 Posts: 5,875
Location: Thailand
You'lle be lucky, Ille be pleased if it does but shocked. I think it will be too long as well.
Reply With Quote
  #5  
Old 10-12-2007, 09:19 AM
Slider Slider is offline
Junior Member
 
Join Date: Oct 2007
Rep: 10 Posts: 6
Location: Toronto,Ontario,Canada
Quote:
Originally Posted by Frosty View Post
You'lle be lucky, Ille be pleased if it does but shocked. I think it will be too long as well.
you mean the sender will be too long?.....
Reply With Quote
  #6  
Old 10-12-2007, 09:27 AM
Frosty's Avatar
Frosty Frosty is online now
Senior Member
 
Join Date: May 2002
Rep: 1693 Posts: 5,875
Location: Thailand
Probably,-- but I really don't know. Try it.
Reply With Quote
  #7  
Old 10-16-2007, 10:08 AM
Slider Slider is offline
Junior Member
 
Join Date: Oct 2007
Rep: 10 Posts: 6
Location: Toronto,Ontario,Canada
cleaned the old one up with CLR and it was indeed 140 deg with a date of 8,73 which I guess means it was the original....will pop in the new one in the spring,...
Reply With Quote
Reply



Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
temp buzzer saabster Propulsion 6 04-11-2007 09:04 AM
1974 20' Seacraft Rebuild hobson Fiberglass and Composite Boat Building 1 01-11-2007 07:12 PM
Help me you OMC buffs - 1974 135hp globaldude Outboards 6 11-08-2006 12:30 AM
1974 jaguar 74 jaguar Projects & Proposals 0 10-08-2006 09:02 PM
High-temp Fiberglass chris7891011 Fiberglass and Composite Boat Building 6 03-12-2006 07:57 PM


All times are GMT -5. The time now is 04:47 AM.


Powered by: vBulletin Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.
Web Site Design and Content Copyright ©1999 - 2012 Boat Design Net