formula for hydromax criteria

Discussion in 'Stability' started by sirhamid, Dec 9, 2013.

  1. sirhamid
    Joined: Jul 2009
    Posts: 40
    Likes: 1, Points: 0, Legacy Rep: 38
    Location: middle east-persian gulf

    sirhamid Junior Member

    hi dear
    any body know about the define criteria in parametric style?
    like the area under GZ curve = 0.055 - 0.001 * (30 - fi)....:!::confused::confused:
     
  2. TANSL
    Joined: Sep 2011
    Posts: 7,369
    Likes: 699, Points: 123, Legacy Rep: 300
    Location: Spain

    TANSL Senior Member

    I do not know what is "criteria in parametric style" but I think that reading what SOLAS says, in relation to the criteria for assessing the stability of vessels, is very instructive.
    I hope that this will help you.
     

    Attached Files:

  3. Murat124
    Joined: Oct 2013
    Posts: 73
    Likes: 0, Points: 0, Legacy Rep: -8
    Location: İstanbul

    Murat124 Junior Member

    Sirhamiddd from Iran.

    Trying to catch free information from boat design at last???

    Dear colleguages please do not give professional or technical advice to Mr Sirhamid. He is working for Iranian state
     
  4. TANSL
    Joined: Sep 2011
    Posts: 7,369
    Likes: 699, Points: 123, Legacy Rep: 300
    Location: Spain

    TANSL Senior Member

    Mr. Moderator, I think this can not consent. Do we have to discriminate sirhamid even without knowing his political thinking?. Even knowing them, it would NOT be right to do so, in my opinion.
     
  5. Ad Hoc
    Joined: Oct 2008
    Posts: 7,773
    Likes: 1,678, Points: 113, Legacy Rep: 2488
    Location: Japan

    Ad Hoc Naval Architect

    Please keep your personal political and religious ideology out of this forum. This is a boating/naval architecture forum, not a free for all debate on political/religious bigotry etc.
     
  6. Boat Design Net Moderator
    Joined: Feb 2010
    Posts: 564
    Likes: 162, Points: 43, Legacy Rep: 1004
    Location: www.boatdesign.net

    Boat Design Net Moderator Moderator

    Governments impose some restrictions on specific information and technology sharing/trade with some countries; however it does not seem basic academic questions such as this would get anyone into trouble or cause problems. People shouldn't be discriminated against based on their location for basic academic help unless the information being requested is restricted by a specific act of law (and it's impossible to reliably limit who is reading information on a public internet forum by country, and so restricted information should not be posted on a public forum regardless.)
     
  7. sirhamid
    Joined: Jul 2009
    Posts: 40
    Likes: 1, Points: 0, Legacy Rep: 38
    Location: middle east-persian gulf

    sirhamid Junior Member

    thanks


    thanks for your suggest dear:idea:
     
  8. Dr34m3r
    Joined: Mar 2012
    Posts: 161
    Likes: 4, Points: 18, Legacy Rep: 10
    Location: Europe

    Dr34m3r Senior Member

    Stop any racist comment here ! Make the world happy.
     
  9. Murat124
    Joined: Oct 2013
    Posts: 73
    Likes: 0, Points: 0, Legacy Rep: -8
    Location: İstanbul

    Murat124 Junior Member

    Yes I have started a racist campaign against spongers :D.

    SPONGING IS STRICTLY PROHIBITED ( FYA Mr SIRHAMID)

    This kind of people try to steal intellectual property. I have got some experience with this gentlement. I have no problem with his natioanality or religion.

    My problem is personal with him and with his mentality

    if somebody asked to you some technical advices on building of naval ships against employment promise. ( They were a few of stupid questions but his
    intention were to obtain some free technical information)
    so he stole my time.

    And now find opportunity to announce him from this forum
     
  10. TANSL
    Joined: Sep 2011
    Posts: 7,369
    Likes: 699, Points: 123, Legacy Rep: 300
    Location: Spain

    TANSL Senior Member

    I do not know what Sirhamid has done, and I don´t care, but his tone seems polite and nothing suggests that he seeks to steal our intellectual property. On the other hand, the truth is that, in general, the things that are discussed here might not be classified as high-tech. We are professional speaking, exchanging, knowledge and some of us, as does Sirhamid, ask for help on some issues. I've done it myself and I do not think this is reprehensible.
    Murat124, please keep us apart from your personal traumas. Thank you.
     
  11. Murat124
    Joined: Oct 2013
    Posts: 73
    Likes: 0, Points: 0, Legacy Rep: -8
    Location: İstanbul

    Murat124 Junior Member


    You are out of categorization ( as colleguage). I am talking with my colleguages.
    you do not have to read and give comment to my threads
     

  12. TANSL
    Joined: Sep 2011
    Posts: 7,369
    Likes: 699, Points: 123, Legacy Rep: 300
    Location: Spain

    TANSL Senior Member

    This is better : "You are out of categorization ( as colleague). I am talking with my colleagues".
    A new mistake among the many you have.
     
    Last edited: Dec 13, 2013
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.