 |  |
| Boat Design Forums | Boat Design Directory | Boat Design Gallery | Boat Design Book Store | Thanks to Our Site Sponsors |
| ||||
|
#1
02-14-2006, 04:54 PM
| |||
| |||
| Quick question...IACC Numbers/Spec Anyone got a set of ballpark numbers for a recent America's Cup Class boat? Ballast, Displacement, LWL, Sail area, BWL..... Thanks in advance!  |
|
#2
02-14-2006, 09:48 PM
| ||||
| ||||
| I cant supply the exact figures you wanted but here are some of SUI-64 (relatively recent)... SUI 64 LOA: 25 m LWL: 18 m Beam: 4 m Draft: 4 m Sail Area (upwind): 350 m2 – (downwind): 690 m2. Displacement: 25 tons. Then, on ETNZ's website this is what they give as approximate numbers for an ACC design... LOA-24m LWL-18m Draft-4.1m Beam 4.5m Mast Height-32.5m SA-upwind-320 sq. m downwind-480 sq. m Weight Hull and fittings- 3 tonnes Rig-1 tonne keel(fin)-1 tonne bulb-19 tonnes hope this helps. |
 |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Quick question for anyone currently, or recently, on the MacNaughton course | JonH | Education | 19 | 04-13-2006 01:02 AM |
| IACC Rule DSP limits | jboat | Boat Design | 0 | 12-28-2004 11:47 AM |
| English Spec | Guest | Boat Design | 0 | 10-08-2003 05:08 PM |
| wood spec? | Materials | 2 | 12-01-2002 06:02 PM | |
| IACC winged keels design question | tim mcd | Boat Design | 5 | 02-04-2002 08:34 AM |
Linear Mode
