| ||||
|
#1
| |||
| |||
| Volvo Outdrive Shudder I'm experiencing a shudder when turning. I have a '95 Volvo 5.7Gi with a 290 DuoProp. Just put in a rebuilt engine. U-joints and intermediate shaft bearings appeared to be fine. The outdrive had some play and I replaced steering cable and the steering fork bushings while I had it appart. Still see some play, looks like it is coming from the helmet bushing and still some slop in the fork. Seems to run fine when going straight but begins to shudder when turning port or starboard. Harder the turn, the more shudder. Could it be the loose outdrive? or another suggestion? |
|
#2
| |||
| |||
| Are the U-joints lined up correctly? Y. |
|
#3
| |||
| |||
| Seemed to go right over splines when I put the outdrive back on. Last edited by hkkohler : 07-10-2005 at 09:43 PM. Reason: typo |
|
#4
| ||||
| ||||
| A loose bushing will make the U-joints get out of alignment in a turn.
__________________ Gonzo |
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Volvo 200 outdrive oil question | 68Donzi | Propulsion | 0 | 09-14-2005 12:52 PM |
| outdrive problem with my Volvo 200 | 68Donzi | Propulsion | 1 | 09-14-2005 10:48 AM |
| volvo penta 200 outdrive noise | cmzracing | Propulsion | 2 | 01-02-2005 04:48 AM |
| Volvo 270 gear ratio help... | Leon Phelps | Powerboats | 4 | 03-09-2004 02:12 PM |
| 1990 7.4L 454 w/ Volvo outdrive problem | boatddreamer | Powerboats | 3 | 10-03-2003 12:15 AM |