Boat Design Forums  |  Boat Design Directory  |  Boat Design Gallery  |  Boat Design Book Store  |  Thanks to Our Site Sponsors

Go Back   Boat Design Forums > Design > Propulsion
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 04-13-2006, 11:47 AM
hdragon hdragon is offline
Junior Member
 
Join Date: Mar 2006
Rep: 10 Posts: 5
Location: PA
radio controlled model : Need help in setting up the motors

So i'm trying to setup 2 electric motors for my boat (it's a small RC boat). I just wonder which way should i put the motors: 2 motors under the water or 1 under and 1 on air. I've attached the 2 pictures with the idea. Can anyone give me some advice how to deal with this matter?

One more thing, how do you make a propeller?
Attached Thumbnails
radio controlled model : Need help in setting up the motors-b1.jpg  radio controlled model : Need help in setting up the motors-b2.jpg  
Reply With Quote
  #2  
Old 04-13-2006, 01:48 PM
marshmat's Avatar
marshmat marshmat is offline
Senior Member
 
Join Date: Apr 2005
Rep: 1918 Posts: 4,113
Location: Ontario
I'm assuming your RC unit can control each motor separately. If so, I'd want them both in the water, side by side and fairly far apart- keeping the boat symmetrical. This would allow you to steer and even spin the boat with throttle control only.
Functional propellers are tricky to build. You might try tracking down a book on propeller theory, but most modellers I know just buy the props as they're kind of tricky to make one-off.
__________________
- Matt Marsh - Marsh Design (small craft blog and designs)
Reply With Quote
  #3  
Old 04-13-2006, 02:05 PM
hdragon hdragon is offline
Junior Member
 
Join Date: Mar 2006
Rep: 10 Posts: 5
Location: PA
thanks.
About the propeller, which one do you think give more thrust power: 3-blades or 2-blades propeller?
Reply With Quote
  #4  
Old 04-13-2006, 02:31 PM
marshmat's Avatar
marshmat marshmat is offline
Senior Member
 
Join Date: Apr 2005
Rep: 1918 Posts: 4,113
Location: Ontario
Prop selection is a complex black art, guided by a bit of dimensionally-inconsistent math that drives engineers insane. The selection of prop shape, diameter, pitch and number of blades is guided primarily by three things: how heavy is the boat, how fast is it intended to go, and where is the optimum torque band of the motor. The formulae used for large boats don't scale very well to models- I'd suggest getting in touch with a good hobby shop or club, there's a lot of really helpful and knowledgeable people in both.
__________________
- Matt Marsh - Marsh Design (small craft blog and designs)
Reply With Quote
  #5  
Old 04-13-2006, 04:52 PM
hdragon hdragon is offline
Junior Member
 
Join Date: Mar 2006
Rep: 10 Posts: 5
Location: PA
Well, i guess i have to test with 2 and 3 blade propeller then.

One more question, when i have 2 propellers under the water, should i use 2 propellers with opposite side (i think they called left hand and right hand), and spin different directions? or should i use 2 propellers same side and spin in one direction?
Reply With Quote
  #6  
Old 04-14-2006, 03:11 PM
yipster's Avatar
yipster yipster is offline
Senior Member
 
Join Date: Oct 2002
Rep: 1027 Posts: 3,269
Location: netherlands
look at the duoprop this RC guy made! http://www.boatdesign.net/gallery/sh...500/ppuser/690
have ya also seen the RC flying wingboat having its airprop fwd? its all on this foreum somewhere including making a wooden prop
Reply With Quote
Reply



Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Setting up Suzi df225 on GW208 Jim Miller Propulsion 2 01-12-2006 10:53 AM
uv-setting prepregs arivaca Materials 1 12-22-2004 02:55 AM
Setting up Shop in MA ( Metro West) bjl_sailor Boatbuilding 0 05-26-2004 02:28 PM
Setting up boat plans Nomad Boat Design 4 02-08-2003 07:28 AM
Outboard Motors Marketplace 0 04-28-2002 12:51 AM


All times are GMT -5. The time now is 06:25 AM.


Powered by: vBulletin Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.
Web Site Design and Content Copyright ©1999 - 2012 Boat Design Net