 |  |
| Boat Design Forums | Boat Design Directory | Boat Design Gallery | Boat Design Wiki (beta) | Boat Design Book Store | Thanks to Our Site Sponsors | Sitemap |
| ||||
|
#1
08-29-2005, 01:57 PM
| |||
| |||
| help! grinding noise in 4cyl volvo penta we took the boat out this weekend, and we started to get a pretty nasty grinding sound coming from what sounds like the outdrive. the noise is more pronounced when turning, and while moving the trim. the outdrive oil is full and seems to be clean. any idea if this may be? i have the shop manual, and i'm rather mechanically inclined, is there something that i could check for before taking it to a shop?  |
|
#2
08-29-2005, 05:27 PM
| |||
| |||
| is the outside of the drive perfectly clean? no muck in the lower bearings etc?
__________________ Open Source Marine Charting - openpilot.sourceforge.net Supported by engineering.selfip.org |
|
#3
08-29-2005, 08:59 PM
| |||
| |||
| yeh, the outside of the outdrive looks fine. i was reading through my clymer manual and it sounds like it might be the universal joint needing greesing? |
 |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Loss of power on a Volvo Penta | Lounger | Powerboats | 4 | 08-04-2005 06:10 PM |
| volvo penta 200d starting in the water issues | lmorgan30 | Boat Design | 7 | 07-16-2005 12:29 AM |
| How interchangeable are Volvo penta outdrives? | tuantom | Propulsion | 0 | 01-02-2005 10:19 PM |
| volvo penta 200 outdrive noise | cmzracing | Propulsion | 2 | 01-02-2005 04:48 AM |
| Volvo Penta SP drive no reverse | Bragg Brothers | Powerboats | 4 | 04-22-2004 02:24 PM |
Linear Mode
