Cable or Chain Ferry

Discussion in 'Propulsion' started by oliver.ilg, Mar 11, 2015.

  1. oliver.ilg
    Joined: May 2009
    Posts: 18
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Brazil

    oliver.ilg Junior Member

    Dear Members,

    we have been asked to manage a cable ferry project in Brazil.

    Therefore I'm looking for any advice, specially regarding manufacturers of equipment to power such a ferry.

    Anyone out there with experience or knowledge regarding this kind of propulsion?

    Thanks, Oliver
     
  2. TANSL
    Joined: Sep 2011
    Posts: 7,369
    Likes: 699, Points: 123, Legacy Rep: 300
    Location: Spain

    TANSL Senior Member

    I do not understand what is a "cable ferry" boat. Is it a boat moving pulling a cable?. Could you please elaborate more what the mission is, what work should make that kind of boat?.
     
  3. Mr Efficiency
    Joined: Oct 2010
    Posts: 10,386
    Likes: 1,042, Points: 113, Legacy Rep: 702
    Location: Australia

    Mr Efficiency Senior Member

    Fixed river crossings where there is no bridge.
     
  4. daiquiri
    Joined: May 2004
    Posts: 5,371
    Likes: 258, Points: 93, Legacy Rep: 3380
    Location: Italy (Garda Lake) and Croatia (Istria)

    daiquiri Engineering and Design

  5. oliver.ilg
    Joined: May 2009
    Posts: 18
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Brazil

    oliver.ilg Junior Member

    A cable Ferry is a Ferry boat that crosses a portion of water using cables (or chains) for movement, instead of propellers. I've seen ones with one, two or three cables on a research on the net.

    You'll find some examples here: http://en.wikipedia.org/wiki/Cable_ferry

    all the best
     
  6. Mr Efficiency
    Joined: Oct 2010
    Posts: 10,386
    Likes: 1,042, Points: 113, Legacy Rep: 702
    Location: Australia

    Mr Efficiency Senior Member

    Pretty sure there was one of those in the movie "Jaws", would have been terrible if the giant fish had severed the cable ! :p
     
  7. TANSL
    Joined: Sep 2011
    Posts: 7,369
    Likes: 699, Points: 123, Legacy Rep: 300
    Location: Spain

    TANSL Senior Member

    Everything is clear now. It would be important, but essential, to know what size boat are we talking about, among other things. The drive can go from several men pulling a rope, to a large winch to pull and roll the cable (or something similar)
     
  8. philSweet
    Joined: May 2008
    Posts: 2,682
    Likes: 451, Points: 83, Legacy Rep: 1082
    Location: Beaufort, SC and H'ville, NC

    philSweet Senior Member

    1 person likes this.
  9. BKay
    Joined: Jan 2011
    Posts: 34
    Likes: 12, Points: 8, Legacy Rep: 28
    Location: Reedville, VA

    BKay Junior Member

    I'd like to provide you with some brilliant insight, but I can only provide you with slightly-below-average insight. I live within a mile or so of such a system in Virginia. It uses a dumb cable (it appears to be two cables laid across the bottom). The power appears to be onboard the ferry, it looks like they use a diesel generator to power an electric motor that pulls the ferry across the cables.

    I don't know the exact size, but it handles 3-4 vehicles and is captained by an individual with a 6-pack licence (I assume, the sign says "max 6 passengers"). The distance this system covers is approximately 1/4 mile. I understand there has been a ferry at this location for many years (the first one was probably driven by animals).

    It is possible the Virginia Department of Transportation may provide insight. Best of luck.

    http://www.virginiadot.org/travel/sunny_bank_ferry.asp

    http://www.ssentinel.com/index.php/rivah/article/free_ferries_are_an_echo_of_the_past
     
  10. Pericles
    Joined: Sep 2006
    Posts: 2,015
    Likes: 141, Points: 63, Legacy Rep: 1307
    Location: Heights of High Wycombe, not far from River Thames

    Pericles Senior Member

  11. gonzo
    Joined: Aug 2002
    Posts: 16,790
    Likes: 1,714, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    They are not too complicated and quite common in Brazil. They both run of a capstan in the middle with wraps around it and guide rollers at each end of the boat. Ferries are symmetrical since they don't turn around. Cable is lighter than chain. It requires enough wraps on the capstan to prevent slipping.
     
  12. DCockey
    Joined: Oct 2009
    Posts: 5,229
    Likes: 634, Points: 113, Legacy Rep: 1485
    Location: Midcoast Maine

    DCockey Senior Member

    I've been on several cable/chain ferries.

    One traveled along a guide cable and moved by a capstan pulling on a cable.

    Another one traveled along a guide cable and was propelled a "push" boat. The push boat was fixed at the bow by a bracket on the side of the ferry, and could swing 180 degrees to reverse direction.

    A third traveled along a guide cable but appeared be propelled by propellers on either end.
     
  13. DCockey
    Joined: Oct 2009
    Posts: 5,229
    Likes: 634, Points: 113, Legacy Rep: 1485
    Location: Midcoast Maine

    DCockey Senior Member

    Also have been a couple of small cable ferries which were propelled by a person pulling on a rope.
     
  14. dougfrolich
    Joined: Nov 2002
    Posts: 661
    Likes: 21, Points: 28, Legacy Rep: 225
    Location: San Francisco

    dougfrolich Senior Member

    two cable ferries near Rio Vista California one is the Real McCoyII and the other is the J-mack. Operated by Cal-Trans.
     

    Attached Files:


  15. dougfrolich
    Joined: Nov 2002
    Posts: 661
    Likes: 21, Points: 28, Legacy Rep: 225
    Location: San Francisco

    dougfrolich Senior Member

    Attached Files:

    Last edited: Mar 12, 2015
Loading...
Similar Threads
  1. ahdblo7
    Replies:
    2
    Views:
    2,852
  2. okaakshay
    Replies:
    11
    Views:
    8,533
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.